|
|
|
RF-CATV Optical
Transport - RECEIVER
Radio over fiber (RoF)
or RF over fiber (RFoF) refers to a technology whereby light is
modulated by a radio frequency signal and transmitted over an
optical fiber link-Wikipedia
Main technical
advantages of using fiber optical links are lower transmission
losses and reduced sensitivity to noise and electromagnetic
interference compared to all-electrical signal transmission.
Single mode Multimode fiber optic links with LNB & 10MHz
options. Indoor & outdoor chassis. ISO9001 Certified. RF over
fiber solutions for RF Cable TV CATV and RF Signal to Fiber Chain
Link Optic RF Transport. Single Mode-Wikipedia
and Multimode-Wikipedia
Fiber Optic
Receiver.
RF / Broadband -
Cable TV - UHF/VHF/FM over fiber
|
|
|
|
FIBER
OPTIC Receivers
Description:
There
are two versions of systems; 40 channel and 80 channel units. Both
systems will receive CATV signals from 20 MHz to 860 MHz in
bandwidth. TheVL2200/2300 series broadband systems are
designed to be used in small to medium campus links, which can
incorporate high split couplers. They will transport up to 80 VSB-AM
video channels up to 30 km while maintaining good Carrier to Noise
and Carrier to Distortion parameters. Only available in 1310 nm.
VL2240R
Data Sheet
|
BROADBAND
TRANSPORT
Description: There
are two versions of systems; 40 channel and 80 channel units. Both
systems will receive CATV signals from 20 MHz to 860 MHz in
bandwidth. TheVL2200/2300 series broadband systems are
designed to be used in small to medium campus links, which can
incorporate high split couplers. They will transport up to 80 VSB-AM
video channels up to 30 km while maintaining good Carrier to Noise
and Carrier to Distortion parameters. Only available in 1310 nm.
VL2280R
Data
Sheet
|
Emcore RF-CATV
Fiber
EMCORE is dedicated to the highest standards of precision manufacturing, quality and reliability. Our manufacturing facilities and processes utilize extensive quality assurance systems and performance testing and are ISO 9001 certified.
|
Optiva
Platform RF, Microwave & Multimedia Fiber Optic Transport
System – 1 MHz to 40 GHz
Description:
EMCORE’s Optiva platform includes a wide range of SNMP
managed fiber optic transmitters, receivers, optical amplifiers,
RF and optical switches and passive devices, video, audio, data
and Ethernet products that provide high-performance fiber optic
transmission from 1 MHz to 40 GHz. These units can be used to
construct transparent inter- and intra-facility links for RF and
microwave signal transport, antenna remoting, multimedia/video
transport, electronic warfare systems and other high-dynamic-range
applications.
Optiva Platform RF Data
Sheet
|
|
Emcore
7830W CATV
Description:
The 7830W CATV optical receiver is a single-mode fiber pigtailed
module featuring a low-noise, impedance-matched broadband
photodiode and RF amplification. The device receives optical analog and/or digital signals for a range
of video broadcast options, and delivers the corresponding RF
electrical output. The wide bandwidth supports the delivery of
signals up to 3GHz.
E-7830W
CATV Data
Sheet
|
Emcore
2808
Description:
The Force CATV Model 2808 110 Channel Private Network Solution
(PNS)/Professional Distribution Solution (PDS) VSB/AM Fiber Optic
Receiver, working with Model 2804 PDS or 2805 PNS transmitter,
provides CATV distribution headend operators with an extensive
array of features that offer a low-cost solution to increase
system performance. The unit provides an RF output of +28 dBmV,
allowing multiple RF splits without the use of an external RF
amplifier Emcore
2808R-SF-SP
Data
Sheet
|
Emcore
2807
Description:
Emcore/Force 2807 CATV Receiver - The Emcore/Force CATVLinx
Model 2807 Mini-node Optical Receiver, working with either the
Emcore/Force Model 2804 PDS or 2805 PNS transmitter, provides CATV
distribution headend operators with an extensive array of features
that offer a low-cost solution to increase system performance. The
unit provides an output of +38 dBmV of RF over the entire optical
input range, allowing multiple RF splits without the use of an
external RF amplifier. Additionally, the mini-node's ability to
operate over a wide optical input range of -8 to +4.5 dBm allows
for a variety of system designs without degrading performance
E-2808 Data
Sheet
|
See:
Transmitters: RF / Broadband Fiber
|
Emcore
2809R
Emcore
2808R
Description:
Force's
next-generation CATVLinx
optical
transport links offer a three-tiered approach
to affordable, highly reliable multichannel CATV transmission.
Encompassing six products with three ranges of performance, Force,
Inc. can provide a solution to fit any CATV end user's
application. Today's CATV networks use a hybrid fiber/coax (HFC)
configuration to reduce cost while increasing performance and
transmission range. As the term implies, an HFC network uses
coaxial cable for shorter transmission lengths between video
equipment and the transmitter, or the receiver and the cable
customer's television, while the path between the transmitter and
the receiver uses single-mode optical fiber to greatly extend
transmission distances. Even in limited distance applications,
this combination allows the system designer to use the lowest cost
solution for each portion of the network
E-2809R
Data
Sheet
E-2808R Data
Sheet
|
|
Emcore
2807R
Description:
Force's
next-generation CATVLinx
optical
transport links offer a three-tiered approach
to affordable, highly reliable multichannel CATV transmission.
Encompassing six products with three ranges of performance, Force,
Inc. can provide a solution to fit any CATV end user's
application. Today's CATV networks use a hybrid fiber/coax (HFC)
configuration to reduce cost while increasing performance and
transmission range. As the term implies, an HFC network uses
coaxial cable for shorter transmission lengths between video
equipment and the transmitter, or the receiver and the cable
customer's television, while the path between the transmitter and
the receiver uses single-mode optical fiber to greatly extend
transmission distances. Even in limited distance applications,
this combination allows the system designer to use the lowest cost
solution for each portion of the network.
E-2807R Data
Sheet
|
|
Olson RF-CATV
Fiber
Olson Technology, Inc. designs and manufactures electronic and fiber optic products for CATV, L-Band, FTTH, Headend Processing, CCTV, Private Cable, Aircraft Entertainment, and OEM clients. Our manufacturing expertise blends custom and off the shelf products to maintain leading edge technology in our complete line of fiber optic transmission products. We specialize in broadband RF products that modulate, demodulate, and process audio and video signals in both analog and digital formats.
|
OTPN-1000
Description:
Premise Node Model OTPN-1000 is a high-output,
high-performance, full-featured CATV optical node designed around
the very latest optical receiver technology to reliably deliver a
full slate of multiplexed video, high speed data & telephony
services in an HFC/PON fiber-to-the-premise (FTTP) environment. OTPN-12V
Power supply for OTPN-400 fiber optic receiver.
OTPN-1000 Data
Sheet
|
|
OTPN-400
Description:
The Olson Technology Inc. OTPN-400 is a high quality, cost
effective, bi- directional CATV node designed around the latest
optical receiver technology. It is designed to operate with
optical input levels ranging from -8dBm to -1dBm. The OTPN-400
operates with external +12 VDC either direct or up the coax with
optional power inserter. An AC Power Adapter is also available for
supplying +12VDC. Low power consumption, less than 5 Watts.
OTPN-400
Data
Sheet
|
See: AC
/ DC power supplies
|
See:
RF
Fiber Transmitters
|
OTOR-870
Description:
The
OLSON TECHNOLOGY INC. OTOR-870 Low Level Optical Receiver is
optimized for those applications that require the ultimate in
performance at low optical input levels. This receiver is designed
for those “last mile” applications where optical power is at a
premium. The unit operates from a single 5.2V supply and consumes
less than 2.5 watts. Its push pull design from the detector to the
output insures excellent CSO/CTB performance with full channel
loading. External optical power monitor test points are available
as is a power monitor connection to the power / interface
connector. This feature in conjunction with the shut down feature
allows for this unit to be utilized in redundant switching
applications.
OTOR-870
Data
Sheet
|
OTOR-300
Description: Model
OTOR-300 cost effective CATV Return Path Receiver utilizes a new
low-noise, impedance-matched, high-efficiency 1310/1550nm
broadband photodiode and advanced RF amplification circuitry to
facilitate carriage of critical downstream video, data, telephony
and internet traffic in an HFC broadband environment.
OTOR-300
Data
Sheet
|
See:
Connectors
/ Fittings
|
See: AC
/ DC
|
AMCP1315-H-110-42/54-FP
Description:
PBN
AMCP1315 Broadband Optical Receiver - The PBN AMCP1315 optical
receiver has been designed to receive and convert optical signals
with wavelengths of either 1200 nm to 1600 nm to radio frequency (RF)
signals of 45 MHz to 870 MHz. The plug-in return path laser
modules and diplex filters provide an extremely versatile optical
node capable of two-way optical communication. Suitable for CATV/MATV
and CCTV applications, the PBN AMCP1315's compact size and
superior optical and RF performance provides the ideal choice for
indoor optical nodes.
AMCP1315
Data
Sheet
|
|
Blonder Tongue RF
Fiber
Blonder Tongue is
a leader in cable television communications, serving the
professional video markets with comprehensive solutions for
content contribution,
products and solutions for 65 years of innovations, brand recognition, quality, and value play integral parts in each and every product we make.
|
FRDA-S4A-860-43PA
Description: The
FRDA is a fiber optic receiver module integrated with a broadband
distribution amplifier (BIDA). The FRDA is used as a launch
amplifier in a coaxial distribution sub-system fed from a single
mode broadband fiber network. The FRDA’s optical receiver
section provides exceptional CNR performance at low optical input
levels. This feature is also a cost saving one, since it permits
the use of lower optical power transmitters. The FRDA is available
with 550 and 860 MHz RF bandwidths and power doubling hybrid
amplifier technology to provide high RF output levels with low
distortion. The FRDA operates with the FIBT Series of transmitters
as well as those from other leading manufacturers.
FRDA-S4A-860-43PA
Data
Sheet
FRDA-S4A-550-43PA Data
Sheet
FRRA-S4A-860-43PA Data
Sheet
FRRA-S4A-550-43
Data
Sheet
|
|
SIAR-T-U4T-31
Description:
FM
Video/Unbalanced Stereo Audio Transmission Over Optical Fiber.
Meets and or exceeds RS-250C Medium
Haul Specifications.
Single-mode or Multimode Versions Available. Audio Bandwidth 50
Hz-20 KHz. 0-15 dB Optical Loss Range with Multimode Fiber Using
1310nm Optics. 0-23 dB Optical Loss Range with Single-Mode Fiber
Using 1310nm or 1550nm. MIAT/MIAR ts in our MIRC-12 or FIRC-3
Chassis’. SIAT/SIAR Models Designed For Stand Alone
Applications.
SIAR-U4T-31
Data
Sheet
SIAR-U8T-31 Data
Sheet
MIAR-U4T-31
Data
Sheet
MIAR-U8T-31 Data
Sheet
SIAT-S5T-31 Data
Sheet
|
SIBR-S4A-425
Description: Up to Twenty Five Channels on One Single Mode Fiber.
5-350 MHz Bandwidth. Supports Transmission of Sub-band, Low-band, FM, Mid-band
and High-band Channels. Utilizes Inputs from Standard CATV VSB/AM Modulators,
Processors, etc. 1550 nm Operation to 50 km. Tri-color LED For Optimum Input Indication.
SIBT/SIBR Designed for Stand Alone Applications. MIBT/MIBR fits in our MIRC-12 and FIRC-3 Rack Chassis' for
19 Inch Rack Mounting
SIBR-S4A-425 Data
Sheet
MIBR-S4A-425
Data
Sheet
|
SIBR-S4A-210
Description:
FM
Video/Unbalanced Stereo Audio Transmission Over Optical Fiber.
Meets and or exceeds RS-250C Medium
Haul Specifications.
Single-mode or Multimode Versions Available. Audio Bandwidth 50
Hz-20 KHz. 0-15 dB Optical Loss Range with Multimode Fiber Using
1310nm Optics. 0-23 dB Optical Loss Range with Single-Mode Fiber
Using 1310nm or 1550nm. MIAT/MIAR ts in our MIRC-12 or FIRC-3
Chassis’. SIAT/SIAR Models Designed For Stand Alone
Applications.
SIBR-S4A-210
Data
Sheet
MIBR-S4A-210
Data
Sheet
|
MIBR-M3T-25
Description: Up to
Five Channels on One Single Mode Fiber. 5-250 MHz Bandwidth. SIBT/SIBR Designed for Stand Alone Applications.
MIBT/MIBR fits in our MIRC-12 and FIRC-3 Rack Chassis' for
19 Inch Rack Mounting. Distance to 3km.
MIBR-M3T-25
Data
Sheet
SIBR-M3T-25
Data
Sheet
|
FIBR-S4A-860-P
Description: 45-860
MHz Bandwidth. LED
For Optical Input Status. Models Available in Both Stand Alone and
Modular. Configurations For Installation In MIRC-12 And FIRC-3
Chassis'. Built-in Adjustable Optical Attenuator on
FIBR-S4A-860-PA
FIBR-S4A-860-P
Data
Sheet
FIBR-S4A-860-PA
Data
Sheet
FIBR-S4A-860
Data
Sheet
|
Thor RF Fiber-Wikipedia
Thor
Custom solution engineering, extensive on-site testing, made in
the USA, and unparalleled 5-year extensive warranty on all Thor
built products help make Thor a leader in global telecom fiber
optic engineering. We develop custom solutions for fiber and
broadcast applications, including Video Over IP, RF Over Fiber and
Video Over Fiber, and focus on helping clients to best determine
exactly what they need and which are the most efficient and cost
effective solutions to their information technology needs..
|
RF CATV
fiber Receiver - Mini
Description:
The
Thor F-RF system is using for the transport and distribution of
CATV RF signals over fiber optic cable. The transmitter
converts the incoming RF signal (870 MHz) to an optical
signal. This optical signal can be distributed to multiple
end points with a coupler, or can be run more than 20 miles over a
single mode fiber optic cable. Often times a full size rack mount
receiver is not needed at the endpoints.
RF-100CATV
Data
Sheet
|
|
FTTx RF
Mininode
Description:
The F-MININODE is a
RF optical receiver for use in fiber to the home
applications. The unit has 45-870MHz RF outputs for digital
TV as well as an optional optical transmitter for the 5-45MHz
cable modem return path. Available Models: F-MININODE-1R Receiver only 1
fiber input CATV Output
F MININODE 1RT
Receiver and Return Path Transmitter single fiber F-MININODE-2RT Receiver and Return Path Transmitter 2 fibers
FTTXRF
Data
SheetData
Sheet
|
CATV
RF Fiber Receiver
Description:
This
is a CATV fiber optic receiver for transporting RF signals in the
40-870 MHz range. The unit can accept optical signals in all
bands.
F-RF-RX Data
Sheet
|
CATV 4
Channel Cable TV Return Path Receiver
Description:
The
F-RF-RP4Rx is the absolute best way to transmit upstream signals
in the 5-200mhz band. Thor always creates super low noise
units, among the best, to provide incredible signal processing
without any interference or distortion from your network.
F-RF-RP4RX
Data
Sheet
|
Optical
RF Receiver with Return Path
Description:
Thor
F-WRF series transceivers are wideband radio frequency optical
modems for bi-directional broadband communications. This
platform can be custom configured
F-WRF Data
Sheet
|
|
ATX RF Fiber
ATX Networks is a market-leading global provider of access network, video network and radio network solutions serving the cable, satellite, commercial and enterprise sectors.
|
Headend
Broadband Optical Receiver
Description:
The
2RU QFRN 870 MHz and 1 GHz fiber optic receivers are designed for
headend and hub applications. They provide GaAs power-doubled RF
output technology. The 2-way model offers maximum RF output due to
the lower insertion loss of the plug-in interstage pad and EQ
design. It also comes with an integral optical power meter and
reverse sweep insertion test point.
QFRN
Data
Sheet
|
|
Headend
Return path Optical Receiver
Description:
The
1RU QFQR holds 2 or 4 independent return path optical receivers,
which utilize high performance photodiodes & hybrid
amplification. An optical power indicator along with an RF test
port on the front panel can be used to quickly monitor each
receiver’s operating status.
QFQR Data
Sheet
|
Fibertronix RF Fiber
Fibertronix – a
product division of North American Cable Equipment, Inc. (NACE)
– specializes in the design, development, manufacturing and
distribution of fiber optic products for the Cable TV, Direct
Broadcast Satellite and CCTV Security industries. Product lines
include fiber optic cable and jumpers, transmitters, receivers and
baseband video transmission kits.
|
FT-FRXID-RM-SCAPC
Receiver
Description:
19
Inch rack mountable fiber optic receiver, 47-860 MHz receiver,
-8dBm to +2dBm input range, dual RF outputs, front panel optical
signal level meter, optical slope and attenuation control, -20 dB
RF test port, SC/APC connection.
FT-FRXID-RM-SCAPC Data
Sheet
|
|
Cisco
– D9865H – Digital Satellite Receiver with HD, SD and HDMI
Output
Description:
HDMI
and Component video outputs for HDTV (the ‘H’ designation).4:2:0
High Definition (HD) MPEG-2 and MPEG-4 AVC decoding.4:2:0 Standard
Definition (SD) MPEG-2 and MPEG-4 AVC decoding.4:2:0 NTSC and PAL
(B/G/I/D/M/N) video decoding.MPEG, Dolby Digital, and HE-AAC
audio decoding.DVB Subtitling
and DVB VBI (WST, WSS, VPS)
D9865H Data
Sheet
|
Pico RF Fiber
International telecommunications technology company serving radio and television broadcasters, content providers, hospitality, and commercial markets in more than 50 countries. We’re a global leader in the design, manufacture, and support of high-performance, high-value infrastructure, distribution, and customer premise equipment.
|
PICO
Macom Receiver
Description:
Wide
C/Ku band 950~2150MHz tuner with dynamic range of -25 to −
65dBm provides optimum performance in low signal conditions
Macom Data
Sheet
|
|
Pico
Digital Receiver
Description:
The
Pico Macom PR4200IRD is a very user friendly and professional
re-broadcast grade microprocessor-controlled satellite receiver
decoder designed for CATV, SMATV, and cable radio services.
PR4200IRD
Data
Sheet
|
Tiernan RF Fiber
Radyne maintains a
dynamic, integrated, solutions-driven team equipped with the tools
essential for rapidly delivering innovative products, services and
engineered solutions.
|
Tiernan
HD4040
Description:
The
HD4040 is Tiernan's newest High Definition & Standard
Definition Decoder. It uses the latest advanced Tiernan Technology
to offer both video and audio front panel confidence monitors.
Through advances in integration, the HD4040 is able to offer an
unprecedented combination of features, performance and reliability
at an industry-leading price.
HD4040 Data
Sheet
|
|
Tiernan
TDR4022
Description:
The
TDR4022 MPEG-2 IRD delivers features and performance collected
over years of leadership in the Broadcast Contribution and
Satellite Modem business. Tiernan technology enabled the first
commercial deployment of 4:2:2 MPEG-2 video
compression/decompression in 1997 and continues today with
advanced video decompression technology as the industry demands
higher performance.
TDR4022 Data
Sheet
|
K-Tech CATV Fiber
K-Tech specializes in technology and communication/telephony equipment. We carry new, refurbished, and used equipment. We strive to provide both quality and variety in our selections along with a knowledgeable staff to answer any questions you may have. If there is something that your looking for and don't see it in our inventory, please ask us or visit often as we are listing items daily. K-Tech is a subsidiary of The GerBreCha Group, LLC. a Tampa, FL based retail conglomerate.
|
K-Tech
DVM 150E
Description:
The
DVM-150E is a single rack, Professional DTV Receiver/Decoder with
the capability of handling SD & HD MPEG-2 4:2:0 DTV signals.
Its modular design minimizes cost to the end user and allows it to
be used in a wide variety of DTV applications. Seven module slots
are available for end users to customize and choose the inputs and
outputs that they desire, thus eliminating the extra cost &
space of unwanted or unused inputs & outputs. The basic
DVM-150E consists of a 1RU chassis equipped with a fan, power
supply, motherboard and RS232.
DVM-150E Data
Sheet
|
|
KT-DVM-150E-SAP
Description:
The
DVM-150E is a single rack, Professional DTV Receiver/Decoder with
the capability of handling SD & HD MPEG-2 4:2:0 DTV signals.
Its modular design minimizes cost to the end user and allows it to
be used in a wide variety of DTV applications. Seven module slots
are available for end users to customize and choose the inputs and
outputs that they desire, thus eliminating the extra cost &
space of unwanted or unused inputs & outputs. The basic
DVM-150E consists of a 1RU chassis equipped with a fan, power
supply, motherboard and RS232.
KT-DVM-150E-SAP Data
Sheet
|
Multicom CATV Fiber
Multicom stocks over 16,000 products from more than 270 of the world's major manufacturers. These products are used to acquire, process and distribute television, data, voice, security, and traffic control signals over fiber optic, copper, and coax cable.
|
MUL-HRPR-4A
Description:
The Multicom MUL-HRPR-4A
Optical Return Path Receiver is ideally suited for use in HFC and
FTTx and many other fiber optic-based data, video, and voice
networks, including Broadband Stimulus and FCC National Broadband
projects and applications, and provides a cost effective solution.
MUL-HRPR-4A Data
Sheet
MUL-HRPR-4B
Data
Sheet
|
|
MUL-OTC-RPR4-V
Description:
The
Multicom MUL-OTC-RPR4-V Four-channel Return Path Optical Receiver
Module is used for receiving return path television video and
audio, digital television, and voice and data (or compressed data)
signals. It uses E-O optical receiving devices and the signal
amplifier incorporates a low noise GaAs module to ensure a high
quality signal outpu
MUL-OTC-RPR4-V
Data
Sheet
|
|
AL5R3-55 Compact Fiber Optic Receiver
Description:
The Foxcom compact AL5R3-55 receiver converts incoming signals from Foxcom’s optical AL5T3-1-CWDM-5 transmitter into multiple RF outputs. This cost effective solution boasts a large optical input window and linear performance, enabling it to distribute up to five high- quality, L-Band (200-2500MHz) TV signals to multiple dwelling units. The AL5R3-55 is designed with internal CWDM to provide optimum, quality satellite TV signals in point-to-multi-point applications. The AL5R3-55’s compact design and low power consumption enables it to be easily integrated in any MDU environment.
AL5R3-55
Data
Sheet
|
|
FiberSync
PVFS-T-6V PVFS-R-6V
DIRECT
TV APPROVED
Description:
The
FiberSync solution combines a multichannel RF transmitter with a
GPON network overlay to deliver a multi-play environment in any
high density subscriber application. The system is completely
modular and field upgradeable, allowing the operator to deploy
only the necessary RF modules today and build as content capacity
requirements expand. This means lower up front CAPEX while
maintaining a system that can support future high bandwidth
content such as expanded HD or 4K channel lineups and high data
rate broadband traffic. From a single point to point optical
transfer to high count fiber to the home solutions, FiberSync is
the product of choice for next generation optical networks.
VFS-T-6V PVFS-R-6V
Data
Sheet
|
|
|
See:
Transmitters: RF / Broadband Fiber
|
Cable TV
Uhf/Vhf/FM CATV RF over optical fiber. Small in size, flexible, very
low loss technology using. Optical Receiver Fiber optic cable Optical
receiver (to convert back to RF). Fiber optic Receivers are used to
launch the communication signals in the form of light through an
optical fiber, it converts electrical signals to optical signals-Wikipedia
Specializing in RF over Fiber components, Radio RF/Optical Link
Modules and Plug-Ins RF Fiber Optic Receivers and Transmitters-Wikipedia
|
|