RF Satellite signals in the L Band over fiber from the antenna to the satellite receiver Home
     About Satellite  |  Government  |  Custom Built  |  RX/TX  |  About Us  |  Contact Us                    
 

L-Band Fiber Optic

 

The Largest Selection    Optic L Satellite IF Fiber

 

 

 

      ANTENNAS

 

 

Wifi - Bluetooth
Cell / Mobile Phone
Special Application
Satellite / Parabolic
- Small Dish
- Medium Dish
- Large Dish
- Portable Dish
Dish Cover / Snow-Ice
Custom Built
UHF / VHF / FM

     AMPLIFIER

  Wifi - Bluetooth
Cell / Mobile Phone
Satellite / Parabolic
Custom Built
UHF/VHF - CATV - RF

      RECEIVERS

 

 

RF / Broadband Fiber
AV / Baseband Fiber
IF / L-Band Fiber
IRD / FTA and STB

      TRANSMITTERS

 

 

RF / Broadband Fiber
AV / Baseband Fiber
IF / L-Band Fiber
Misc.

      FEEDHORN

 

 

Tx/Rx Transmit Receive
Custom Built
Wave Guides
Satellite / Parabolic

       LNB's

 

 

Tx/Rx Transmit Receive
DBS / FTA / TVRO
PLL - Commercial
LNB - Bracket / Adaptor

       NETWORK

  IPTV
MODEMS
Routers / Switches
Hubs / Controllers
USB
Serial - RS232
PCi - COM
Wireless
Ethernet
Other IP Devices
Drivers
      ACCESSORIES
 

 

Enclosures
AC / DC
Engineering
Splitters / Dividers
Mounts & Hardware
Connectors / Fittings
Terminator / Attenuator
Meters & Scopes
Tools
Combiners / Joiners
Cable & Wire
Modulators
Covers & Heaters
Power Inserters
MultiSwitches
Motors & Positioners
IR - Infrared
CCTV / DVR’s
Grounding / Surge
Rack Mount
Channel Filter
Wall Plates
Satellite TELEPHONE
Misc. Products
     Helpful LINKs
 

 

Footprints
What Frequency
Latitude - Longitude
Phone Test Mode
Channels Transponders
Wifi Scanner
Satellite Chart
Dish Pointer
SATcalculator
Goodies
     GENERAL INFO
 

 

About Satellite
Archives
StoreCam
Home

 

 

    Track Fedex  Track UPS


Input: your comments and suggestions are always welcome.


 

Welcome to SatelliteDish.com  >> Catalog >> Receivers >> IF / L-Band Fiber

 >>  IF / L-Band Fiber:Wikipedia

Satellite IF Optical Transport - RECEIVER-Wikipedia

Satellite L-Band-Wikipedia RF Over Fiber Receiver. The L-Band fiber optic Transmitter/Receiver pair are used for transporting RF Satellite signals in the L Band over fiber from the antenna to the satellite receiver. By transporting the L-Band RF signal over Fiber. L band, long wavelengths, 1565–1625 nm. U band, ultralong. five telecom optical wavelength bands named O- E- S- C- and L bands-Wikipedia

L-Band Fiber Optic IF Transport


Blonder Tongue Fiber L-Band

Blonder Tongue Fiber L-Band

Blonder Tongue is a leader in cable television communications, serving the professional video markets with comprehensive solutions for content contribution,  products and solutions for 65 years of innovations, brand recognition, quality, and value play integral parts in each and every product we make. 


 

 

 

L-Band Fiber Optic Receiver

L-Band Fiber Optic Receiver

$797.96

Description: Blonder Tongue Affordable Alternative to Coaxial LNB Cabling • Compact and Environmentally Protected Housing • 850-3000 MHz Bandwidth For Enhanced Frequency Stacking Applications • 18 dB Optical Loss Budget S4A-3000

S4A-3000 Data Sheet

 

 

 

 

 

L-BAND OPTICAL CARD CHASSE  holds 6 cards  

L-BAND OPTICAL CARD CHASSE  holds 6 cards

$CALL

Description: Card Cage, Radiant Fiber Communications, holds up to 6 L band cards with internal & redundant power supplies

CR200RPS/VB50 Data Sheet

 

Olson Fiber L-Band

Olson Fiber L-Band

Olson Technology, Inc. designs and manufactures electronic and fiber optic products for CATV, L-Band, FTTH, Headend Processing, CCTV, Private Cable, Aircraft Entertainment, and OEM clients. Our manufacturing expertise blends custom and off the shelf products to maintain leading edge technology in our complete line of fiber optic transmission products. We specialize in broadband RF products that modulate, demodulate, and process audio and video signals in both analog and digital formats. 


 

 

 

Fiber Optic Receiver 3.6GHz Miniature L-Band Receiver

$274.99

Description: Olson transmits 10MHz to 3600MHz RF signals. The receiver offers high or low gain options, and works with any Olson Technology, Inc. L-Band transmitter in the 1270-1610nm wavelength range. The receiver has a wide optical input range of -15 to +3dBm and may be ordered with SC/APC or FC/APC optical connectors. The Model OLMR is packaged in a miniature enclosure for standalone installations

OLMR1270S Data Sheet

 

 

 

 

 

 

OLRR Rugged 3.0GHz L-Band Fiber Optic Link

$799.98

Description: Transmits 500MHz to 3,000MHz RF signals. The link offers high or low gain, and can be specified for 1310nm, 1550nm, or CWDM wavelengths. The transmitters offer remote LNB powering, and the link is configured in a rugged standalone enclosure.

OLRR RX-LL Data Sheet

 

 

 

 

 

 

FIBER RECEIVER, L-BAND SM SC/APC CC

$1,495.99

Description: Fiber Optic single mode L band receiver, Radiant Fiber Communications, 12 db @1310nm SC/APC card cage version

VB150S-R-RA3 Data Sheet

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Emcore Fiber L-Band

Emcore Fiber L-Band

EMCORE is dedicated to the highest standards of precision manufacturing, quality and reliability. Our manufacturing facilities and processes utilize extensive quality assurance systems and performance testing and are ISO 9001 certified.


 

Optiva OTS-2L10

Optiva OTS-2L10

$CALL

Description: EMCORE’s Optiva OTS-2L10 10 MHz / L-Band Fiber Optic Links are optimized to provide transparent, simultaneous 10 MHz and L-Band signal transport for VSAT antenna applications. The Optiva OTS-2L10 provides excellent isolation of the 10 MHz reference signal from L-Band signals at the transmitter and receiver with very low phase noise, which facilitates greater flexibility to locate VSAT antennas for optimum performance.

OTS-2L10 Data Sheet

 

 

 

Optiva IF, L & S-Band Fiber Optic Transport

Optiva IF, L & S-Band Fiber Optic Transport

$CALL

Description: EMCORE’s Optiva OTS-1L Series Wideband Fiber Optic Links are optimized to perform in the 50 MHz to 3 GHz frequency range providing transparent IF, L- and S-Band signal transport for satellite antenna and interfaculty link applications. 1310 nm, 1550 nm, CWDM and DWDM card module options are available along with a dual-density card that increases chassis capacity by a factor of two. 

TS-2L10 Data Sheet

 

Thor Fiber L-Band

Thor Custom solution engineering, extensive on-site testing, made in the USA, and unparalleled 5-year extensive warranty on all Thor built products help make Thor a leader in global telecom fiber optic engineering. We develop custom solutions for fiber and broadcast applications, including Video Over IP, RF Over Fiber and Video Over Fiber, and focus on helping clients to best determine exactly what they need and which are the most efficient and cost effective solutions to their information technology needs.


 

L-BAND Singlemode Fiber Reciever for 10km

L-BAND Singlemode Fiber Receiver for 10km

$CALL

L-BAND Singlemode Fiber Receiver for 40km

$CALL

Description: L-Band RF satellite signal extender over fiber optic cable transport system. multiple L-band fiber optic transport up to 80 Km. Can also provide LNB power at various voltages.

F-LBAND-Rx-10 /40 Data Sheet

 

 

 

 

 

L-BAND Singlemode Fiber Reciever for 20km

L-BAND Singlemode Fiber Receiver for 80km

$CALL

L-BAND Singlemode Fiber Receiver for 120km

$CALL

Description: L-Band RF satellite signal extender over fiber optic cable transport system. multiple L-band fiber optic transport up to 80 Km. Can also provide LNB power at various voltages.

F-LBAND-Rx-80/120 Data Sheet

 

 

 

 

4Ch L-Band Dish Satellite TV Fiber TX/RX 1- 32 end points

4Ch L-Band Dish Satellite TV Fiber TX/RX 1- 32 end points

$CALL

Description: 4 LNB/Satellite TV Polarities over 1 strand single mode fiber up to 40Km for Remote Dish locations. The most convenient way to transport any modern satellite signal over single mode fiber using an internal multiplexer to carry up to 4 signals of RF Satellite feeds

FLB41-RX-CWDM-XX Data Sheet

 

 

4LNB's Satellite Distribution System for MDU over 1 fiber up to 5000 endpoints

4LNB's Satellite Distribution System for MDU over 1 fiber up to 5000 endpoints

$CALL

Description: L-Band signal to almost an unlimited number of end points. In correlation with using triple play CWDM passives, it is possible to transport 4 L-bands and bi-directional gigabit Ethernet over one single mode fiber.
Satellite distribution systems specifically designed for MDU / MTU and Fiber to the home applications. System can supply Satellite TV up to 5000 houses from one dish

F-LB41-DWTX Data Sheet

 

 

 

 

 

6 Ch L-Band Dish Satellite TV distribution system for MDU

6 Ch L-Band Dish Satellite TV distribution system for MDU

$CALL

Description: The F-LB61-DWDM system from Thor Broadcast is designed to deliver 6 independent coax feeds from satellite antennas over fiber optic cable.  These systems are similar to the standard LB61 systems from Thor, but with upgraded laser optics compatible with EDFA optical amplifiers

F-LB61-DWDM Data Sheet

 

 

 

 

 

6 Ch L-Band Dish Satellite TV Fiber TX/RX 1- 32 end points

6 Ch L-Band Dish Satellite TV Fiber TX/RX 1- 32 end points

$CALL

Description: The F-LB61 system from Thor Fiber is designed for use with satellite TV systems that have six LNB coax cables coming from the antennas.  These are typically systems that support an additional antenna used for international content or free to air programming.  The LB61 solution will work with most standard satellite TV antennas such as DirecTv and Dish Network systems.

F-LB61-RX Data Sheet

 

 

 

 

SSC Model 3430-L

SSC Model 3430-L

$CALL

Description: A tracking receiver for antenna step tracking and automatic uplink power control!  The Models 3430-L, LD, LF, and LW are fully frequency agile satellite receivers designed to provide a linear DC reference voltage proportional to the received signal level of a satellite beacon or narrow-band SCPC carrier. Frequency selection on 10 kHz steps may be accomplished from the front panel or remote control. Pre-detection noise bandwidth of 50 kHz facilitates accurate tracking at very low C/N levels

SSC Model 3430-L Data Sheet

 

 

 

FiberSync PVFS-T-6V PVFS-R-6V

FiberSync PVFS-T-6V PVFS-R-6VDIRECT TV APPROVED

$CALL

Description: TThe FiberSync solution combines a multichannel RF transmitter with a GPON network overlay to deliver a multi-play environment in any high density subscriber application. The system is completely modular and field upgradeable, allowing the operator to deploy only the necessary RF modules today and build as content capacity requirements expand. This means lower up front CAPEX while maintaining a system that can support future high bandwidth content such as expanded HD or 4K channel lineups and high data rate broadband traffic. From a single point to point optical transfer to high count fiber to the home solutions, FiberSync is the product of choice for next generation optical networks.

VFS-T-6V PVFS-R-6V Data Sheet

 

 

 

 

Evertz Fiber L-Band

Evertz Fiber L-Band

Evertz Microsystems Ltd., a manufacturer of high quality digital broadcast and film products distributed worldwide.


 

 

2307LR mini L-band fiber optic receiver

2307LR Miniature L-Band/Wideband Fiber Optic Receiver

$CALL

Description: The 2307LR is a fiber optic receiver in a revolutionary form factor. With the same diameter as a BNC connector, and overall length of 3.3" (85mm), the 2307LR is the smallest RF optical receiver in the industry. It accepts an optical LC connector input on one end, and provides an electrical output on the other. The 2307LR attaches to the input of a device without any intermediate cabling required. This essentially offers direct optical input to the connected piece of equipment, without incurring the cost and rack space associated with using conventional optical receivers. The primary application is in providing direct optical inputs to XRF series routers, without requiring external fiber receiver cards.

2307LR Data Sheet

 

 

 

 

 

2406LR L-Band/Wideband Standalone Fiber Receiver

2406LR L-Band/Wideband Standalone Fiber Receiver

$CALL

Description: The 2406LR is a fiber optic receiver for signals in the satellite L-Band and other frequency ranges. It accepts a single fiber optic input on an FC/APC connector and provides a pair of equal power electrical outputs. Packaged in a small, standalone enclosure, the 2406LR is temperature-hardened and ideal for mounting on or near antenna structures, or in any application where modular/rack-mount products are not practical. The –WP version features dust and water protection for direct outdoor mounting without a secondary enclosure. When combined with the 2408LT a bi-directional link can be created, ideal for VSAT and similar applications

2406LR Data Sheet

 

 

 

Dual L-Band/Wideband RF Fiber Receiver with VistaLINK and SmartMON

Dual L-Band/Wideband RF Fiber Receiver with VistaLINK and SmartMON

$CALL

Description: The F-LB61 system from Thor Fiber is designed for use with satellite TV systems that have six LNB coax cables coming from the antennas. These are typically systems that support an additional antenna used for international content or free to air programming.  The LB61 solution will work with most standard satellite TV antennas such as DirecTv and Dish Network systems.

7807LR-2     Data Sheet
7807LR-2-H
Data Sheet

 

 

 

 

 

7706LR Wideband RF Fiber Receiver for Extended L-Band

7706LR Wideband RF Fiber Receiver for Extended L-Band

$CALL

Description: The 7706LR is a fiber optic receiver for extended L-Band and other signals. It accepts a fiber optic input from a companion transmitter and provides an electrical output signal. Control of the card is provided locally at the card edge via DIP switches.

7706LR Data Sheet

 

 

 

 

 

 

 

L-Band Satellite Fiber Receiver 7707LR  

$244.99

L-Band Satellite Fiber Receiver 7707LR-WB

$244.99

Description: The 7707LR and 7707LR-WB are VistaLINK - capable fiber optic receivers for L-Band Satellite signals. The 7707LR-WB offers extended bandwidth from 250 to 2250MHz vs 950 to 2250MHz for the 7707LR version. Both 7707LR and 7707LR-WB accept a fiber optic input from the companion L-Band transmitters and provide L-Band RF output signals via BNC's. Monitoring and control of card status is provided locally at the card edge and remotely via VistaLINK

77087LRA Data Sheet
7708LR-H 
Data Sheet

 

 

7707IFRA

7707IFRA 70/140MHz IF Fiber Receiver

$CALL

Description: The 7707IFRA is a VistaLINK capable fiber optic receiver for 70/140MHz IF signals. The 7707IFRA accepts a fiber optic input from the companion 7707IFTA and provides  two 70/140MHz IF output signals. Monitoring and control of card status and parameters is provided locally at the card edge and remotely via VistaLINK capability

7707IFRA Data Sheet

 

See: AC /DC

See: IF / L - Band Transmitters

 

 

See: Cable and Wire

 

 

 

SSC Model 3430-L 

$CALL

Description: A tracking receiver for antenna step tracking and automatic uplink power control!  The Models 3430-L, LD, LF, and LW are fully frequency agile satellite receivers designed to provide a linear DC reference voltage proportional to the received signal level of a satellite beacon or narrow-band SCPC carrier. Frequency selection on 10 kHz steps may be accomplished from the front panel or remote control. Pre-detection noise bandwidth of 50 kHz facilitates accurate tracking at very low C/N levels

SSC3430-L Data Sheet

 

 

 

 

 

Atlantic Satellite

Atlantic Satellite L-Band

Atlantic Satellite Corporation (ASC) was founded in 2002 by Larry Hayes and Rick Jones based on one simple idea-provide high quality Satellite Communication products and services "at an economical price". Atlantic Satellite Corporation offers over 50 years of combined expertise in Satellite Communications Equipment and systems design, manufacturing and services. The company's primary line of products include Beacon Tracking Receivers, Frequency Conversion Products, such as Up converters and Down converters, an assortment of hand-held test equipment, and much more.


 

ASC300-LW L-Band

ASC300-LW L-Band

$2,475.00

Description: L Band Satellite Beacon Receiver. Input Frequency: 930 MHz to 2300 MHz. Ethernet and Continuous Digital Streaming Options. Designed to real time track the power density of a satellite beacon and output a temperature stabilized DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. Applications: Antenna Tracking Controllers / Uplink Power Controllers. 

ASC300-LW Data Sheet

 

 

 

 

 

ASC300-LW-HC L-band

ASC300-LW-HC L-band

$2,600.00

Description: L Band Satellite Beacon Receiver, High Stability. AFC:  ±60 kHz. Input Frequency: 930 MHz to 2150 MHz. Ethernet and Continuous Digital Streaming Options. Designed to real time track the power density of a satellite beacon and output a temperature stabilized DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. Applications: Antenna Tracking Controllers / Uplink Power Controllers / Telemetry Beacons.

ASC300-LW-HC Data Sheet

 

 

ASC300L-D L-band

ASC300L-D L-band

$2,475.00

Description: L Band Satellite Beacon Receiver. Input Frequency. L Band Satellite Beacon Receiver.  Input Frequency: 930 MHz to 2300 MHz. Ethernet and Continuous Digital Streaming Options. The Model ASC300L-D Beacon Receiver is a designed for data tracking with side band rejection. Designed to real time track the power density of a satellite beacon and output a DC voltage that is linearly proportional to the beacon power. Applications: Antenna Tracking Controllers / Uplink Power Controllers: 930 MHz to 2300 MHz. Ethernet and Continuous Digital Streaming Options. Designed to real time track the power density of a satellite beacon and output a temperature stabilized DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. Applications: Antenna Tracking Controllers / Uplink Power Controllers. 

ASC300L-D Data Sheet

 

 

 

 

 

ASC302LE-L L-Band

ASC302LE-L L-Band

$2,475.00

Description: Dual L Band Satellite Beacon Receivers. Two independent units in a single rack mount space. Input Frequency: 930 MHz to 2150 MHz.  Ethernet and Continuous Digital Streaming Options. Designed to real time track the power density of a satellite beacon and output a temperature stabilized DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. Applications: Antenna Tracking Controllers / Uplink Power Controllers. Band Satellite Beacon Receiver. Input Frequency: 930 MHz to 2300 MHz. Ethernet and Continuous Digital Streaming Options. Designed to real time track the power density of a satellite beacon and output a temperature stabilized DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. Applications: Antenna Tracking Controllers / Uplink Power Controllers. 

 

 

 

 

 Ku-Band Fiber Optic Receiver

Ku-Band Fiber Optic Receiver

$6,800.00

Description: Ku Band Satellite Beacon Receiver. Tri Band Extended Input Frequency: 10.7 to 12.75 GHz. Ethernet and Continuous Digital Streaming Options. Designed to real time track the power density of a satellite beacon and output a DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. Applications: Antenna Tracking Controllers / Uplink Power Controllers3.4 to 4.2 GHz. Ethernet and Continuous Digital Streaming Options. Designed to real time track the power density of a satellite beacon and output a temperature stabilized DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. Applications: Antenna Tracking Controllers / Uplink Power Controllers. 

ASC300KU1-E Data Sheet

$4400.00

ASC300KU2-E Data Sheet

$4400.00

 

 

 

 

 

 

 

 

 

 

 Ku-Band Fiber Optic Receiver

Ku-Band Fiber Optic Receiver

$4,400.00

Description: Ku Band Satellite Beacon Receiver Internal BDC. Input Frequency: 10.7 to 11.7 GHz. Ethernet and Continuous Digital Streaming Options. Designed to real time track the power density of a satellite beacon and output a temperature stabilized DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. Applications: Antenna Tracking Controllers / Uplink Power Controllers. L Band Satellite Beacon Receiver. Input Frequency. L Band Satellite Beacon Receiver.  Input Frequency: 930 MHz to 2300 MHz. Ethernet and Continuous Digital Streaming Options. The Model ASC300L-D Beacon Receiver is a designed for data tracking with side band rejection. Designed to real time track the power density of a satellite beacon and output a DC voltage that is linearly proportional to the beacon power. Applications: Antenna Tracking Controllers / Uplink Power Controllers: 930 MHz to 2300 MHz. Ethernet and Continuous Digital Streaming Options. Designed to real time track the power density of a satellite beacon and output a temperature stabilized DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. Applications: Antenna Tracking Controllers / Uplink Power Controllers. 

ASC300KU1-I Data Sheet

ASC300KU2-I Data Sheet

$4400.00

 

C-Band Fiber Optic Receiver

C-Band Fiber Optic Receiver

$4,400.00

Description: C Band Satellite Beacon Receiver Input Frequency: 3.4 to 4.2 GHz. Ethernet and Continuous Digital Streaming Options. Designed to real time track the power density of a satellite beacon and output a temperature stabilized DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. Applications: Antenna Tracking Controllers / Uplink Power Controllers. 

ASC300C Data Sheet

 

 

 

 

 

ViaLite L-Band

ViaLite L-Band

20 years of RF over fiber links. 0-10km, 50km and up to 400km. L-Band, Satellite IF, Long Distance, Timing & Ref, Wideband, UHF/VHF, Broadcast, GPS.


 

 

ViaLite L-Band Fiber Optic Links

ViaLite L-Band Fiber Optic Links

$CALL

Description: They have been designed to provide very low carrier-to-noise ratio and extremely linear performance. This means a cost effective technically superior installation for the SatCom user. ViaLite systems have been engineered to give industry leading performance when compared with any other fiber optic link. Only ViaLite links have ultra wide dynamic range so that auto gain control is not required to cope with changing signal intensity caused by meteorological conditions. 

VLSDFC08 Data Sheet

 

IF 70/140MHz Fiber Optic Interfacility Links

IF 70/140MHz Fiber Optic Interfacility Links

$CALL

Description: ViaLite links offer more than an alternative to coaxial cabling in teleport earth stations. They have been designed to provide very low carrier-to-noise ratio and extremely linear performance. This means a cost effective technically superior installation for the SatCom user. ViaLite systems have been engineered to give industry leading performance when compared with any other fiber optic link. Only ViaLite links have ultra wide dynamic range so that auto gain control is not required to cope with changing signal intensity caused by meteorological conditions.

VLIFL508 Data Sheet

$CALL
See: AC / DC

Multiple LNB Transport up to 6 LNB IF Satellite TV Polarities over 1 strand single mode fiber-Wikipedia up to 40Km for Remote Dish locations. The most convenient way to transport any modern satellite signal over single mode fiber using an internal multiplexer to carry up to 6 signals of RF Satellite feeds. Tri Band Extended Input Frequency: 10.7 to 12.75 GHz. Antenna Tracking Controllers / Uplink Power Controllers. IF and L Band Satellite Beacon Receiver. Compact fiber optic transmitter for RF signals L-Band signals within the extended L-Band range of 700MHz to 2300MHz. Pair with the L-Band-Wikipedia fiber optic.

 Satellite Fiber Optic Receiver IF and L-Band

 

RF Satellite signals in the L Band over fiber from the antenna to the satellite receiver
 HOME About Satellite | Government | Custom Built | RX/TX | About Us | Contact Us                          Call Today:  (954) 941-8883 
Copyright © 1995-2016 SatelliteDish.com All Rights Reserved.