|
|
|
|
Splitters /
Dividers - Passive
Types of 2-way, 3-way 4-way, 6-way, 8-way, 12-way, 16-way, 24-way, 32-way,
64-way-Wikipedia DC Power passive passthrough splitters. DC 1Mhz -54Ghz - SMA - Use F, N or SMA Connector - High Frequency Splitter - Active splitters - Real High Frequency Splitter. All passive and all port and single port. Satellite- Fiber optic - HDMI-
RJ45-Wikipedia F-Splitter N-type-SMA-TNC - splitters, diplexers and combiners. Basic and Deluxe Dish Network & DTV and CATV Splitter - Satellite Diplexer Signal Combiner and Splitter Splitters; Satellite Cable TV Dish Approved; Features low insertion loss on both U/V and satellite port; Complies with CEA
Signal Splitters
/ Signal Combiners-Wikipedia
|
|
|
|
|
|
|
|
800-1900
MHz -3 dB Splitter
Description:
S800-1900 MHz band (Cellular, iDEN & PCS) Equal amounts of
signal sent to two antennas for similarly sized areas Each output
port loses 3 dB Can be wired in series (daisy-chained) antennas.
N-Female Connectors
859901 Data
Sheet
|
Dual-Band
Separator / Combiner 800-1900 MHz
Description:
Equal amounts of signal sent to two antennas for similarly
sized areas Each output port loses 3 dB 800-900 MHz &
1850-1990 MHz bands (Cellular, iDEN & PCS) N-Female Connectors
can connect two outside antennas to one Dual-Band amplifier or two
amplifiers to one inside antenna.
859922 Data
Sheet
|
|
See: Combiners / Joiners
|
|
|
|
|
|
2.4 GHz -3 dB Splitter
2way
Description:
2-Way
2.4 GHz Signal Splitter N-Female Connector.
Cast aluminum construction Weatherproof for
indoor or outdoor use DC power will pass to all ports RoHS
Compliant 2.4 GHz Signal Splitters/Signal Combiners are available
in 2-Way, 3-Way and 4-Way models. They feature N-Female or Reverse
Polarity TNC Jack connectors.
243SPL
Data
Sheet
|
2.4 GHz -3 dB Splitter
3way
Description:
3-Way
2.4 GHz Signal Splitter N-Female Connector.
Cast aluminum construction Weatherproof for
indoor or outdoor use DC power will pass to all ports RoHS
Compliant 2.4 GHz Signal Splitters/Signal Combiners are available
in 2-Way, 3-Way and 4-Way models. They feature N-Female or Reverse
Polarity TNC Jack connectors.
242SPL
Data
Sheet
|
|
4-Way
2.4 GHz Signal Splitter
Description:
4-Way
2.4 GHz Signal Splitter N-Female Connector Compatible with 802.11b and 802.11g Wireless LAN WiFi applications
Industrial grade, Cast aluminum construction Weatherproof for
indoor or outdoor use DC power will pass to all ports RoHS
Compliant 2.4 GHz Signal Splitters/Signal Combiners are available
in 2-Way, 3-Way and 4-Way models. They feature N-Female or Reverse
Polarity TNC Jack connectors.
244SPL Data
Sheet
|
4-Way
5.8 GHz Signal Splitter
Description:
Industrial grade, Cast aluminum construction Weatherproof for
indoor or outdoor use DC power will pass to all ports RoHS
Compliant up to 5.8 GHz Signal Splitters/Signal Combiners are available
in 2-Way, 3-Way and 4-Way models. They feature N-Female or Reverse
Polarity TNC Jack connectors.
244SPLRP
Data
Sheet
|
|
3.5
GHz Splitter 2way
Description:
3.5
GHz Signal Splitters/Signal Combiners are available in 2-Way and
4-Way models. They feature N-Female connectors. Cast aluminum construction Weatherproof for
indoor or outdoor use DC power will pass to all ports RoHS
Compliant 2.4 GHz Signal Splitters/Signal Combiners are available
in 2-Way, 3-Way and 4-Way models. They feature N-Female or Reverse
Polarity TNC Jack connectors.
352SPL Data
Sheet
|
3.5 GHz Splitter 4way
Description:
3.5 GHz Signal
Splitters/Signal Combiners are available in 2-Way and 4-Way
models. They feature N-Female connectors. Cast aluminum construction Weatherproof for
indoor or outdoor use DC power will pass to all ports RoHS
Compliant 2.4 GHz Signal Splitters/Signal Combiners are available
in 2-Way, 3-Way and 4-Way models. They feature N-Female or Reverse
Polarity TNC Jack connectors.
354SPL Data
Sheet
|
|
5.4
GHz Splitter 2way
Description:
5.4
GHz Signal Splitters/Signal Combiners are available in 2-Way and
4-Way models. They feature N-Female connectors. Cast aluminum construction Weatherproof for
indoor or outdoor use DC power will pass to all ports RoHS
Compliant 2.4 GHz Signal Splitters/Signal Combiners are available
in 2-Way, 3-Way and 4-Way models. They feature N-Female or Reverse
Polarity TNC Jack connectors.
544SPL Data
Sheet
|
5.4 GHz Signal Splitters
Description:
5.4
GHz Signal Splitter/Signal Combiner is available in a 4-Way model.
This splitter features N-Female connectors. Cast aluminum construction Weatherproof for
indoor or outdoor use DC power will pass to all ports RoHS
Compliant 2.4 GHz Signal Splitters/Signal Combiners are available
in 2-Way, 3-Way and 4-Way models. They feature N-Female or Reverse
Polarity TNC Jack connectors.
542SPL Data
Sheet
|
|
5.8
GHz Splitter 2way
Description:
5.8
GHz Signal Splitters/Signal Combiners are available in 2-Way and
4-Way models. They feature N-Female connectors.
582SPL Data
Sheet
|
5.8 GHz Signal Splitters
Description:
5.8
GHz Signal Splitter/Signal Combiner is available in a 4-Way model.
This splitter features N-Female connectors.
584SPL Data
Sheet
|
|
1
GHz Signal Splitter 2way
Description:
Manufactured to high performance standards, TruSpec's DSU-series
1GHz professional-grade MATV splitters provide excellent
performance at low costs, rivaling competitors' equivalent models.
2W1GF
Data
Sheet
|
S3HD AND S3HD-PP 3 GHz
L-band Satellite Hi-Q Splitters 2Way
Description:
The
BGI Hi-Q Series is the ideal splitter for your Digital two-way
plans. Designed for the highest performance in systems utilizing
Digital IP integration, cable modem and analog services where the
highest isolation and RF performance are required. The Hi-Q design
features SMT technology combined with high quality ferrites and
blocking capacitors on all ports for long term stability in
performance.
3W1GF Data
Sheet
|
|
5-1000 MHz
1GHz CATV SOLDER BACK SPLITTER - (2 WAY)
Description:
Passive splitter ideal for cable or
terrestrial TV signals, used particularly for digital TV. This
splitter features low insertion loss and high return loss and
isolation. The metal body features two mounting holes and
grounding
terminals.
2W!GF Data
Sheet
|
5-1000
MHz
1GHz CATV SOLDER BACK SPLITTER - (3 WAY)
Description:
Tin plated zinc die-cast housings for
perfect corrosion protection and grounding. Completely soldered
back provides the highest possible RFI shielding more than 130dB.
High precision machine threaded F-ports with NO DC POWER PASSING
DESIGN. Applications may vary from headend combining to typical
drop installations. This splitter series should be used where
increased bandwidth is being designed into the distribution
systems. Printed circuit board ensures consistent RF performance
and high port to port isolation.
3W1GF Data
Sheet
|
|
5-1000
MHz
1GHz CATV SOLDER BACK SPLITTER - (4
WAY)
Description:
Tin plated zinc die-cast housings for
perfect corrosion protection and grounding. Completely soldered
back provides the highest possible RFI shielding more than 130dB.
High precision machine threaded F-ports with NO DC POWER PASSING
DESIGN. Applications may vary from head end combining to typical
drop installations. This splitter series should be used where
increased bandwidth is being designed into the distribution
systems. Printed circuit board ensures consistent RF performance
and high port to port isolation.
4W1GF Data
Sheet
|
5-1000
MHz
1GHz CATV SOLDER BACK SPLITTER - (8
WAY)
Description:
Tin plated zinc die-cast housings for
perfect corrosion protection and grounding. Completely soldered
back provides the highest possible RFI shielding more than 130dB.
High precision machine threaded F-ports with NO DC POWER PASSING
DESIGN. Applications may vary from head end
combining to typical
drop installations. This splitter series should be used where
increased bandwidth is being designed into the distribution
systems. Printed circuit board ensures consistent RF performance
and high port to port isolation.
8W1GF Data
Sheet
|
|
5-1000
MHz
1GHz CATV SOLDER BACK SPLITTER - (16 WAY)
Description:
Tin plated zinc die-cast housings for perfect corrosion protection
and grounding. Completely soldered back provides the highest
possible RFI shielding more than 130dB. High precision machine
threaded F-ports with NO DC POWER PASSING DESIGN
16W1GF Data
Sheet
|
|
|
See: Combiners / Joiners
|
See: Rack Mount
|
|
5-2150MHz
Wideband Splitters - All ports Power passive 2way
Description:
High frequency Power passing splitter.
Satellite Splitter - IR infra-Red Splitter - All Port Power
Passing Splitter - Diode steered options available.
2WHFS Data
Sheet
|
5-2150MHz
Wideband Splitters - All ports Power passive 3way
Description:
High frequency Power passing splitter.
Satellite Splitter - IR infra-Red Splitter - All Port Power
Passing Splitter - Diode steered options available.
3WHFS Data
Sheet
|
|
5-2150MHz
Wideband Splitters - All ports Power passive 4way
Description:
High frequency Power passing splitter.
Satellite Splitter - IR infra-Red Splitter - All Port Power
Passing Splitter - Diode steered options available.
4WHFS Data
Sheet
|
5-2150MHz
Wideband Splitters - All ports Power passive 8way
Description:
High frequency Power passing splitter.
Satellite Splitter - IR infra-Red Splitter - All Port Power
Passing Splitter - Diode steered options available.
8WHFS Data
Sheet
|
|
DIPLEXER
Description:
It separates or
combines off-air TV-Antenna and Satellite signals from or onto a
single coaxial cable.
DIPLEXER2
Data Sheet
|
MB-2
Wide Band 2-Way Passive Splitter
Description:
Splitter covers 500 kHz to 2.4 GHz. (One port power passing).
Loss: 3.5 dB
2WWBPP Data
Sheet
|
|
UHF
VHF Band separator/joiner
Description:
Band separator/joiner UHF VHF band
separator-joiner, separates or joins UHF and VHF separate inputs
to a single output. Or splits a single input to UHF/VHF outputs.
Power passive to low band/VHF only.
BSUV Data
Sheet
|
Hi
/ Lo UHF VHF separator/joiner
Description:
Hi-lo separator/joiner UHF VHF band
separator-joiner, separates or joins UHF and VHF separate inputs
to a single output. Or splits a single input to UHF/VHF outputs.
Power passive to low band/VHF only.
BSHLUV Data
Sheet
|
|
FT-81
Description:
"T" Female/Male/Female F
Adapter
FT-81 Data
Sheet
|
FWTP-F
Description:
4-Way Female F Adapter.
FWTP-F Data
Sheet
|
|
Pico
Macom 2 Way, 1 ghZ 70 Db
Description:
Pico
Macom 2 way, 1 GHZ 70 Db MATV Splitters, multi-capacitor, epoxy
black. All ports power passing. 3.5Db of insertion loss.
PM2WSP Data
Sheet
|
MBS-4
Wide Band 4-Way Passive Splitter
Description:
As opposed to standard splitters, this
signal splitter has been specially designed to pass, with
low-loss, signals from the bottom of the AM broadcast band (500
kHz) to beyond the top of the satellite radio band (2.4 GHz).
MBS-4 Data
Sheet
|
|
Pico
Macom Splitter 3-Way, Power Passing, 1GHz
Description:
Manufactured to high performance
standards, TruSpec's DSU-series 1GHz professional-grade MATV
splitters provide excellent performance at low costs, rivaling
competitors' equivalent models. Applications range from
residential to MDU installations in international and domestic
cable distribution systems
PM3WSP Data
Sheet
|
Pico
Macom Splitter 4-Way, Power Passing, 1GHz
Description:
Manufactured to high performance
standards, TruSpec's DSU-series 1GHz professional-grade MATV
splitters provide excellent performance at low costs, rivaling
competitors' equivalent models. Applications range from
residential to MDU installations in international and domestic
cable distribution systems.
PM4WSP Data
Sheet
|
|
Pico
Macom Splitter, 2-Way, 1-Power Pass, Satellite
Description:
TruSpec's HFS-series professional-grade high frequency
satellite splitters are manufactured to precise specifications to
provide low insertion loss, high isolation and return loss
performance. HFS-series are ideally suited for head ends where
satellite signals are split to multiple receivers and used in both
950-1450 MHz satellite distribution systems and stacked polarity
950-2150MHz satellite systems
PM2W1P Data
Sheet
|
Pico
Macom Splitter, 2-Way, Power Pass, Satellite
Description:
TruSpec's HFS-series professional-grade
high frequency satellite splitters are manufactured to precise
specifications to provide low insertion loss, high isolation and
return loss performance. HFS-series are ideally suited for head ends
where satellite signals are split to multiple receivers
and used in both 950-1450 MHz satellite distribution systems and
stacked polarity 950-2150MHz satellite systems.
PM2WAPP Data
Sheet
|
|
4-Port
Splitter DC-Passing to 1-Port
Description:
HFS-4-2150 SPLITTER, HIGH FREQUENCY 4 Way 950-1450. TruSpec's
HFS-series professional-grade high frequency satellite splitters
are manufactured to precise specifications to provide low
insertion loss, high isolation and return loss performance. HFS-series
are ideally suited for head ends where satellite signals are split
to multiple receivers and used in both 950-1450 MHz satellite
distribution systems and stacked polarity 950-2150MHz satellite
systems
HFS4-2150
Data Sheet
|
4-Way
Power Pass, Satellite
Description:
HFS-4P-2150 SPLITTER, PICO 50-1. TruSpec's HFS-series
professional-grade high frequency satellite splitters are
manufactured to precise specifications to provide low insertion
loss, high isolation and return loss performance. HFS-series are
ideally suited for head ends where satellite signals are split to
multiple receivers and used in both 950-1450 MHz satellite
distribution systems and stacked polarity 950-2150MHz satellite
systems
HFS4P-2150
Data Sheet
|
Blonder Tongue-Wikipedia
Blonder Tongue is
a leader in cable television communications, serving the
professional video markets with comprehensive solutions for
content contribution,
products and solutions for 65 years of innovations,
brand recognition, quality, and value play integral parts in each
and every product we make.
|
|
2-Way,
10-2150 MHz, 1 Port Power Passing
2-Way,
10-2150 MHz, 2 Port Power Passing
Description:
Blonder
Tongue's LPD Series are precision 2 GHz passives designed for
L-Band distribution systems requiring high frequency, high
performance components. Models are available with either a single power
passing port or with all ports power passing (diode steered, out
to in).
BT2WSP Data
Sheet
|
|
3-Way,
10-2150 MHz, 1 Port Power Passing
Description:
Blonder
Tongue's LPD Series are precision 2 GHz passives designed for
L-Band distribution systems requiring high frequency, high
performance components. The LPD Series 3 way splitters. Models are available with either a single power
passing port or with all ports power passing (diode steered, out
to in).
BT3WSP Data
Sheet
|
|
4-Way
,10-2150 MHz, 1 Port Power Passing
LPD-4P
SPLITTER, 4-WAY LPD-4P
Description:
Blonder
Tongue's LPD Series are precision 2 GHz passives designed for
L-Band distribution systems requiring high frequency, high
performance components. The LPD Series 4 way splitters. Models are available with either a single power
passing port or with all ports power passing (diode steered, out
to in).
BT4WSP-1P Data
Sheet
|
6-Way,
10-2150 MHz, 1 Port Power Passing
LPD-6P
SPLITTER, 8-WAY LPD-8
Description:
Blonder
Tongue's LPD Series are precision 2 GHz passives designed for
L-Band distribution systems requiring high frequency, high
performance components. The LPD Series 6 way splitters. Models are available with either a single power
passing port or with all ports power passing (diode steered, out
to in).
BT6WSP-1P
Data Sheet
|
|
8-Way, 10-2150 MHz, 1 Port Power Passing
Description:
Blonder
Tongue's LPD Series are precision 2 GHz passives designed for
L-Band distribution systems requiring high frequency, high
performance components. The LPD Series consists 8 way splitters. Models are available with either a single power
passing port or with all ports power passing (diode steered, out
to in).
BT8WSP-1P Data
Sheet
|
8-Way,
10-2150 MHz, All Ports Power Passing
Description:
Blonder
Tongue's LPD Series are precision 2 GHz passives designed for
L-Band distribution systems requiring high frequency, high
performance components. The LPD Series consists 8 way splitters. Models are available with either a single power
passing port or with all ports power passing (diode steered, out
to in).
BT8WSP-AP Data
Sheet
|
|
2-Way
Solder Back, 5-1000 MHz, L-Style
Description:
Superior Performance to 1000 MHz 2 (SCVS Only). Die Cast Housing
• RFI Shielding 120 dB. Built-SXRS-2 SXRS-3 SXRS-4 SXRS-8 in
Ground Block.
2SPSBL Data
Sheet
|
|
|
3
Way Solder Back, 5-1000 MHz, L Style
Description:
Superior Performance to 1000 MHz 2 (SCVS Only). Die Cast Housing
• RFI Shielding 120 dB. Built-SXRS-2 SXRS-3 SXRS-4 SXRS-8 in
Ground Block.
3SPSBL
Data Sheet
|
4
Way Solder Back, 5-1000 MHz, L Style
Description:
Superior Performance to 1000 MHz 2 (SCVS Only). Die Cast Housing
• RFI Shielding 120 dB. Built-SXRS-2 SXRS-3 SXRS-4 SXRS-8 in
Ground Block.
4SPSBL Data
Sheet
|
|
6
Way Solder Back, 5-1000 MHz, L Style
Description:
Superior Performance to 1000 MHz 2 (SCVS Only). Die Cast Housing
• RFI Shielding 120 dB. Built-SXRS-2 SXRS-3 SXRS-4 SXRS-8 in
Ground Block.
6SPSBL
Data Sheet
|
8
Way Solder Back, 5-1000 MHz, L Style
Description:
Superior Performance to 1000 MHz 2 (SCVS Only). Die Cast Housing
• RFI Shielding 120 dB. Built-SXRS-2 SXRS-3 SXRS-4 SXRS-8 in
Ground Block.
8SPSBL Data
Sheet
|
|
SDS-12
SPLITTER, 12 WAY 5-1000 MGZ
Description:
12 WAY
5-1000MGZ. Zinc die-cast housing with corrosion protection. Solder
back. 120dB RFI.
12SPSBL Data
Sheet
|
SDS-16
SPLITTER, 16 WAY SDS-16
Description:
16 WAY
5-1000MGZ. Zinc die-cast housing with corrosion protection. Solder
back. 120dB RFI.
16SPSBL Data
Sheet
|
|
2
Way 10-1000 MHz, In-Line Style
Description:
Performance
to 1000 MHz. 2 Way Models. Die Cast Housing. 80 dB RFI
Shielding. Built-in Ground Block.
2WSP1G Data
Sheet
|
3
Way 10-1000 MHz, In-Line Style
Description:
Performance
to 1000 MHz. 2, 3, 4 and 8 Way Models. Die Cast Housing. 80 dB RFI
Shielding. Built-in Ground Block.
3WSP1G Data
Sheet
|
|
4
Way 10-1000 MHz, In-Line Style
Description:
Performance
to 1000 MHz. 2, 3, 4 and 8 Way Models. Die Cast Housing. 80 dB RFI
Shielding. Built-in Ground Block.
4WSP1G Data
Sheet
|
8
Way 10-1000 MHz, L Style
Description:
Performance
to 1000 MHz. 2, 3, 4 and 8 Way Models. Die Cast Housing. 80 dB RFI
Shielding. Built-in Ground Block.
8WSP1G Data
Sheet
|
|
2
Way Solder Back, 5-1000 MHz, In-Line Style
Description:
Superior Performance to 1000 MHz. 2 (SCVS Only) way Model. Die Cast Housing. RFI Shielding 120 dB. Built-SXRS-2
SXRS-3 SXRS-4 SXRS-8 in Ground Block.
SXRS-2 Data
Sheet
|
3
Way Solder Back, 5-1000 MHz, In-Line Style
Description:
Superior Performance to 1000 MHz. 3 (SCVS Only) Way
Models. Die Cast Housing. RFI Shielding 120 dB. Built-SXRS-2
SXRS-3 SXRS-4 SXRS-8 in Ground Block.
SXRS-3 Data
Sheet
|
|
|
|
4
Way Solder Back, 5-1000 MHz, In-Line Style
Description:
Superior Performance to 1000 MHz. 4 (SCVS Only) Way
Models. Die Cast Housing. RFI Shielding 120 dB. Built-SXRS-2
SXRS-3 SXRS-4 SXRS-8 in Ground Block.
SXRS-4 Data
Sheet
|
|
8
Way Solder Back, 5-1000 MHz, L Style
Description:
Superior Performance to 1000 MHz. 8 (SCVS) Way
Models. Die Cast Housing. RFI Shielding 120 dB. Built-SXRS-2
SXRS-3 SXRS-4 SXRS-8 in Ground Block.
SXRS-8 Data
Sheet
|
|
|
|
|
Digital
Ready Splitter 2-Way Solder Back, 5-1000 MHz, In-Line Style, SCTE
Compliant
Description:
2 Way Models with 5-1000MHz bandwidth.-60 dBmV spurious
signals and 2nd order harmonics with a +55 dBmV return input
carrier. Category A3 standard 6KV, 100 KHz ring wave surge
withstand capability on all ports -120 dB RFI, solder back design.
Machine threaded flat F Ports. Round Pin center conductor contact.
Compliant with SCTE splitter guidelines. Zinc alloy die-cast
housing.
2WAY-6KV Data
Sheet
|
Digital
Ready Splitter 3-Way Solder Back, 5-1000 MHz, In-Line Style, SCTE
Compliant
Description:
3 Way Models with 5-1000MHz bandwidth.-60 dBmV spurious
signals and 2nd order harmonics with a +55 dBmV return input
carrier. Category A3 standard 6KV, 100 KHz ring wave surge
withstand capability on all ports -120 dB RFI, solder back design.
Machine threaded flat F Ports. Round Pin center conductor contact.
Compliant with SCTE splitter guidelines. Zinc alloy die-cast
housing.
3WAY-6KV Data
Sheet
|
|
Digital
Ready Splitter 4-Way Solder Back, 5-1000 MHz, In-Line Style, SCTE
Compliant
Description:
4 Way Models with 5-1000MHz bandwidth.-60 dBmV spurious
signals and 2nd order harmonics with a +55 dBmV return input
carrier. Category A3 standard 6KV, 100 KHz ring wave surge
withstand capability on all ports -120 dB RFI, solder back design.
Machine threaded flat F Ports. Round Pin center conductor contact.
Compliant with SCTE splitter guidelines. Zinc alloy die-cast
housing.
4WAY-6KV Data
Sheet
|
Digital
Ready Splitter 8-Way Solder Back, 5-1000 MHz, In-Line Style, SCTE
Compliant
Description:
8 Way Models with 5-1000MHz bandwidth.-60 dBmV spurious
signals and 2nd order harmonics with a +55 dBmV return input
carrier. Category A3 standard 6KV, 100 KHz ring wave surge
withstand capability on all ports -120 dB RFI, solder back design.
Machine threaded flat F Ports. Round Pin center conductor contact.
Compliant with SCTE splitter guidelines. Zinc alloy die-cast
housing.
8WAY-6KV Data
Sheet
|
DirecTV-Wikipedia
DirecTV (stylized
as DIRECTV) is an American direct broadcast satellite service
provider based in El Segundo, California and is a subsidiary of
AT&T. Its satellite service, launched on June 17, 1994,
transmits digital satellite television and audio to households in
the United States, Latin America and the Caribbean.
|
|
SWM
2 Way Splitter,1 Prt Pwr Pass (2-2150Mhz)
Description:
500mA DC passing from one port only. Diode
steered protection. Grounding
port provided. High
isolation between outputs. DIRECTV
Approved for Multi Room Viewing (MRV).
SWM2-SP Data
Sheet
|
|
DIRECTV, 4
Way Splitter,1 Prt Pwr Pass(2-2150Mhz)
Description:
The 4-Way splitter is designed for use
on the Slimline HD satellite dish with SWM LNBFs (up to 4 receiver
application)
SWM2-SP Data
Sheet
|
|
See:
Multi-Switches
|
|
|
SWM
8 Way Splitter,1 Prt Pwr Pass (2-2150Mhz)
Description:
The 8-Way splitter is designed for use
on the SWM (up to 8 receiver application) Frequency Range:
2-2150Mhz. 1 Input & 8 outputs. Could be used indoor &
outdoor. DIRECTV Approved.
SWM8-SP Data
Sheet
|
2-DIRECTV
ProBrand, Triplexer (DTVTRIPLX-02)
Description:
The DTVTRIPLX-02 is a SWM triplexer
consisting of one input port (SWM & Off-air) with two output
ports (IRD output & VHF/UHF output). DIRECTV approved.
DTVTRIPLX-02 Data
Sheet
|
Dish Network-Wikipedia
Dish Network (often
stylized as DISH Network) is an American direct-broadcast
satellite service provider. The company provides satellite
television, satellite Internet access, audio programming, and
interactive television services to commercial and residential
customers in the United States. As of November 2016, the company
provided services to 13.7 million television and 580,000 broadband
subscribers.
|
|
Integrator
(Super Joey)
Description:
A Super
Joey Integrator is used to connect Super Joey to a Dish Pro Plus
LNBF or switch and a port on the MoCA Home Video Network. It
is required for a Hopper system configuration including a Super
Joey.
SJINT Data
Sheet
|
|
DISH
Triplexer
Description:
The
Dish Pro Plus Triplexer combines a DISH Pro Plus Separator and a
UHF/VHF Diplexer into one device that connects to the receiver to
support single cable Installation of "dual-tuner"
satellite feeds and TV1-TV2 home distribution.
DN-TRIPLX Data
Sheet
|
|
See:
Multi-Switches
|
|
|
Solo Node
(Hopper)
Description:
The single node is for a single hopper
system configuration only. It requires connection of two
cables coming from the satellite dish, and has the function of
managing and maintaining communication and transfer of programming
between the Hopper and the Joeys.
SNHR-S Data
Sheet
|
Duo Node
(Two Hopper System)
Description:
The duo node is for a two Hopper system
configuration, but is still also compatible with a single Hopper
system. It requires connection of three cables coming from
the satellite dish, and has the function of managing and
maintaining communication and transfer of programming between the
Hoppers and the Joeys.
DNHR-D Data
Sheet
|
|
Rack Mountable-Wikipedia
We offer a wide
range of rack accessories for any server rack, wallmount, network,
or data center application. The Largest Selection of server rack
shelves and rackmount shelf accessories. Rack Accessories -
Adjustable and Fixed Shelves - pull out - Rack Mount Hardware:
Also a variety of rack mount screws, clip and cage nuts. Racks and
Cabinets Rack Accessories and Rack Mount Hardware.. Rack Mount
Monitors - Wall Cabinet Pivoting Enclosure. Rack Mount cabinet Furniture.
Rack Mount LCD Monitor Displays - Perfect Monitoring made easy
|
|
DEV 2444
Passive 2-Way Splitter
Description:
The multiple passive splitter series DEV 24xx provides the possibility to split to
2 outputs multiple times in just 1 RU within the CATV-Band. The low slope, the high port-to-port isolation and the very low difference in insertion loss between the paths makes it a high quality tool in head-end installations.
DEV-2444 Data
Sheet
|
|
LSC04-1000P
4-WAY 5-1000MHZ 1RU
Description:
The LSC 1000P Series are commercial
quality passive broadband RF splitters / combiners that meet
strict level, match, and loss specifications achieved through the
use of Quintech's proprietary micro strip and SMT technology. They
operate over the 5-1000 MHz frequency range and enable the
splitting or combining of RF signals with repeatable performance
over the entire frequency range and across all I/O ports.
LSC04-1000P
Data Sheet
|
|
LS4-2150A
POWER DIVIDER 4 way Splitter Active
LS4-2150P
Description:
The LS 2150A Series commercial quality
active (zero loss) L band splitters meet strict level, match, and
loss specifications achieved through the use of Quintech's
proprietary micro strip and SMT technology. They operate over the
Satellite L-band (950-2150 MHz) frequency range and enable the
splitting of L-band RF signals with repeatable performance over
the entire frequency range and across all I/O ports.
LS4-2150P
Data Sheet
|
Quintech
DEV 2304 Active 4-Way Combiner
Description:
The DEV 2304 is a commercial quality
4-way active combiner. It operates over the CATV-Band frequency
range of (47 MHz - 862 MHz). The unit features dual, redundant,
adjustable amplifiers with monitoring and alarm functions in
addition to gain and slope adjustments. The monitoring port is
located on the front of the chassis. Redundant power supplies are
included for added reliability.
DEV-2304
Data Sheet
|
|
DEV 2405
Passive 4-Way Splitter
Description:
The passive splitter series DEV 24xx provides the possibility to split to
4 outputs within the CATV-BAND. The low slope, the high port-to-port isolation and the very low difference in insertion loss between the paths makes it a high quality tool in head-end installations.
DEV-2405
Data Sheet
|
DEV 2443
Passive 4-Way Splitter
Description:
The passive splitter series DEV 24xx provides the possibility to split to
4 outputs within the CATV-BAND. The low slope, the high port-to-port isolation and the very low difference in insertion loss between the paths makes it a high quality tool in head-end installations.
DEV-2443
Data Sheet
|
|
See: Combiners / Joiners
|
See: Combiners / Joiners
|
|
LSC08-1000P
Passive Broadband 8 Port Splitter & Combiner
Description:
The LSC 1000P Series are commercial
quality passive broadband RF splitters / combiners that meet
strict level, match, and loss specifications achieved through the
use of Quintech's proprietary micro strip and SMT technology. They
operate over the 5-1000 MHz frequency range and enable the
splitting or combining of RF signals with repeatable performance
over the entire frequency range and across all I/O ports.
LSC08-1000P
Data Sheet
|
DEV 2308
Active 8-Way Combiner
Description:
The passive splitter series DEV 24xx provides the possibility to split to 8 outputs within the CATV-BAND. The low slope, the high port-to-port isolation and the very low difference in insertion loss between the paths makes it a high quality tool in head-end installations.
DEV-2308
Data Sheet
|
|
DEV 2409
Passive 8-Way Splitter
DEV 2442
Passive 8-Way Splitter
Description:
The passive splitter series DEV 24xx provides the possibility to split to
8 outputs within the CATV-BAND. The low slope, the high port-to-port isolation and the very low difference in insertion loss between the paths makes it a high quality tool in head-end installations.
DEV-2442
Data Sheet
|
LS08 2150P L-Band 8
Port Passive Splitter
LS08 2150A
Description:
The
LS 2150 series of passive L-band (950-2150 MHz) splitters permit
simple splitting of RF signals to multiple destinations.
Configurations available from 2 to 32 ports, including dual and
quad units. A variety of powering options and features are
available. The passive splitters are power passing on port
1.
LS08-2150P
Data
Sheet
|
|
LC12 2150A L-Band 12
Port Active Combiner
LS12-2150A2
LS12-2150AC
Description:
The LC 2150A series commercial quality active L-band combiners meet strict level, match, and loss specifications achieved through the use of Quintech’s proprietary
micro strip and SMT technology. These unity gain combiners operate over the Satellite L-band (950-2150 MHz) frequency range and enable the combining of RF signals with repeatable performance over the entire frequency range and across all I/O ports.
LS12-2150AC
Data
Sheet
|
LS12-2150A
POWER DIVIDER 12PORT Passive L BAND
LS12-2150P
LS12-2150P2
Description:
The LS 2150A Series commercial quality
active (zero loss) L band splitters meet strict level, match, and
loss specifications achieved through the use of Quintech's
proprietary micro strip and SMT technology. They operate over the
Satellite L-band (950-2150 MHz) frequency range and enable the
splitting of L-band RF signals with repeatable performance over
the entire frequency range and across all I/O ports.
LS12-2150P
Data
Sheet
|
|
LC16 1000A Active Broadband 16 Port Combiner
LSC16 1000P Passive
Description:
The DEV 2308 is a commercial quality
8-way active combiner. It operates over the CATV-Band frequency
range of (47 MHz - 862 MHz). The unit features dual, redundant,
adjustable amplifiers with monitoring and alarm functions in
addition to gain and slope adjustments. The monitoring port is
located on the front of the chassis. Redundant power supplies are
included for added reliability.
LSC-16
Data
Sheet
|
LS16-2150A
POWER DIVIDER SPLIT ACT 16WAY
Description:
The LS 2150A Series commercial quality
active (zero loss) L band splitters meet strict level, match, and
loss specifications achieved through the use of Quintech's
proprietary micro strip and SMT technology. They operate over the
Satellite L-band (950-2150 MHz) frequency range and enable the
splitting of L-band RF signals with repeatable performance over
the entire frequency range and across all I/O ports.
LSCHF-16
Data
Sheet
|
|
DEV
2316 16-way Active Combiner
Description:
The DEV 2316 is a commercial quality
16-way active combiner. It operates over the CATV-Band frequency
range of (47 MHz - 862 MHz)
DEV-2316
Data Sheet
|
DEV
2417 16-way Active Combiner
DEV
2441 Passive 16-Way Splitter
Description:
The passive
splitter series DEV 24xx provides the possibility to split to 16
outputs within the CATV-BAND. The low slope, the high port-to-port
isolation and the very low difference in insertion loss between
the paths makes it a high quality tool in head-end installations.
DEV-2441
Data Sheet
|
|
LC24
2150A L-Band 24 Port Active Combiner
LC24
2150P Passive
Description:
The LC 2150A series commercial quality active L-band combiners meet strict level, match, and loss specifications achieved through the use of Quintech’s proprietary
micro strip and SMT technology. These unity gain combiners operate over the Satellite L-band (950-2150 MHz) frequency range and enable the combining of RF signals with repeatable performance over the entire frequency range and across all I/O ports.
LC24-2150A
Data
Sheet
|
LC32 1000A
Active Broadband 32 Port Combiner
LC32 1000A
Active Broadband 32 Port Splitter
Description:
The LC 1000A series is a commercial quality line of (5-1000 MHz) broadband. The term broadband refers to the wide bandwidth characteristics for signal transmission. RF combiner that meet strict level, match, and loss specifications achieved through the use of Quintech’s proprietary
micro strip and SMT technology. “Zero” loss and custom configurations available.
LC32-1000A
Data
Sheet
|
|
LS32
2150P L-Band 32 Port Passive Splitter
LS32
2150P L-Band 32 Port Active Splitter
Description:
The DEV 2316 is a commercial quality
16-wayThe LS 2150 series of passive L-band (950-2150 MHz) splitters permit simple splitting of RF signals to multiple destinations. Configurations available from 2 to 32 ports, including dual and quad units. A variety of powering options and features are available. The passive splitters are power passing on port 1.
LS32-2150P
Data
Sheet
|
LS48 1000A Active
Broadband 48 Port Splitter
LS48 2150A L-Band 48
Port Active Splitter
Description:
The LS series is a commercial quality line of (5-1000 MHz) broadband. The term broadband refers to the wide bandwidth characteristics for signal transmission. RF splitters that meet strict level, match, and loss specifications achieved through the use of Quintech’s proprietary
micro strip and SMT technology. “Zero” loss and custom configurations available.
LS49-2150A
Data
Sheet
|
|
LS48-1000P
COMBINER/SPLITTER 48 PORT 1 GHZ
Description:
The LSC 1000P Series are commercial quality passive broadband
RF splitters / combiners that meet strict level, match, and loss
specifications achieved through the use of Quintech's proprietary micro strip
and SMT technology. They operate over the 5-1000 MHz
frequency range and enable the splitting or combining of RF
signals with repeatable performance over the entire frequency
range and across all I/O ports.
LS48-1000P
Data
Sheet
|
LS64 1000P Passive
Broadband 64 Port Splitter/Combiner
LS64 2150A L-Band 64
Port Active Splitter
Description:
The LS series is a commercial quality line of (5-1000 MHz) broadband. The term broadband refers to the wide bandwidth characteristics for signal transmission. RF splitters that meet strict level, match, and loss specifications achieved through the use of Quintech’s proprietary
micro strip and SMT technology. “Zero” loss and custom configurations available.
LS64-2150A
Data
Sheet
|
|
64 PORT
PASSIVE 1 GHZ, RACK MOUNT, F-CONNECTOR
Description:
The LSC 1000P Series are commercial
quality passive broadband RF splitters / combiners that meet strict
level, match, and loss specifications achieved through the use of
Quintech's proprietary micro strip and SMT technology. They operate
over the 5-1000 MHz frequency range and enable the splitting or
combining of RF signals with repeatable performance over the
entire frequency range and across all I/O ports.
LSC-1000
Data Sheet
|
Quintech
DEV 2190 Managed L-Band Distribution System
Description:
The DEV 2190 is a versatile 4 RU Chassis housing up to 16 modules. It allows the user to combine a variety of signal distribution and combining options including IRD controlled and matrix
DEV-2190
Data Sheet
|
|
|
|
|
|
|
|
Fiber Optic-Wikipedia
A
fiber optic splitter, also known as a beam splitter, is based on a
quartz substrate of an integrated waveguide optical power
distribution device, similar to a coaxial cable transmission
system. The optical network system uses an optical signal coupled
to the branch distribution-Wikipedia
|
|
Fiber
Optic Splitter
ADC
Compatible Splitter/Coupler Module
Description:
We offer a complete family of
Splitter/Coupler Modules. Select from 19" Rack Models, Wall mount
Models, or
Corning, Lucent, and ADC plug compatible models, including Corning
Reduced Splice Tray models. Select 1x2 to 1x32 outputs with the
wavelengths and insertion loss of your choice and with the optical
splits you require
ADCFO-SC
Data Sheet
|
|
Wall
Mountable Splitter/Coupler Module
Description:
DWDM's,
EDFA's and Other Linear Bandwidth Applications Requiring Minimal
Broadband dB Loss. Single mode Dual
Wavelength 1310/1550 nm,1x5, 19" Rack mount module
with input pigtails, output pigtails, standard grade coupler
using Corning SMF-28e fiber, SC connectors on the input, SC
connectors on the output, input length 1 meter, and output length
2 meters.
FIBER-SPL2
Data Sheet
|
|
Blonder
Tongue Splitter SCAPC 2way Rack mountable
Description: LTF-2150 terminator. 1x16 Optic Splitter. SC-APC connections. The
optical input is from the rear of the module and all outputs exit the front. DIRECTV approved.
FPS-SPL-01-SC-16-001 Data
Sheet
|
Rack
Mount Splitter/Coupler
Description: Blonder
Tongue Splitter SCAPC 2way Rack mountable
LTF-2150 terminator.
FPS-SPL-01-SC-16-001 1x16 Optic Splitter.
FPS-SPL-01-SC-16-001 Data
Sheet
|
|
Lucent
Compatible Splitter/Coupler Module with Rear Input
Description:
The Coupler
Modules, complete family of Splitter/Coupler Modules. Lucent
Compatible Splitter/Coupler Module with Rear Input. Wall Mountable Splitter/Coupler
Module. Wall Mountable Splitter/Coupler Module, LGX Compatible
Splitter/Coupler Module. Coupler Tray.
SCM-SP Data
Sheet
|
OTCP-1XN
Laser Lite
Description:
The base Model OTCP-1xN (where N = 2, 3,
4, 6 or 8) is a low-profile, rugged, Olson-standard LaserLite
package. It is configured for standalone desktop, shelf or
wall-mounting, or it can also be rack-mounted in the 1RU 19"
EIA Model OTLL-RMKIT-1 as a low-cost option.
OTCP-1XN
Data Sheet
|
|
Dolby
Digital 5.1 Splitter
Description:
ASC3 Dolby Digital 5.1 Splitter. Will
split one fiber optic output into two outputs. Contains 3 female
Toslink jacks.
AC3-SPL Data
Sheet
|
|
|
See: Connectors
/ Fittings
|
|
|
HDMI-Wikipedia
HDMI (High-Definition Multimedia Interface) is a proprietary audio/video interface for transmitting uncompressed video data and compressed or uncompressed digital audio data from a HDMI-compliant source device, such as a display controller, to a compatible computer monitor, video projector, digital television, or digital audio
device. HDMI is a digital replacement for analog video standards.
|
|
HDMI 2-way split
Description:
Distribution Hub splits the HDMI™
signal to 2 or 4 HDMI™ displays. HD HDMI TV / PC.
Split the HDMI output to more than one TV. HD TV Splitter Computer
Monitor splitter. Supports 480i, 480p, 720p, 1080i and 1080p
resolution.
HDMI-2WSPL
Data Sheet
|
|
HDMI 4-way split
Description:
HD HDMI TV / PC. Split the
HDMI output to more than one TV. HD TV Splitter Computer Monitor
splitter. Distribution Hub splits the HDMI™ signal to 2 or 4
HDMI™ displays. Supports 480i, 480p, 720p, 1080i and 1080p
resolution.
HDMI-4WSPL
Data Sheet
|
|
|
|
|
|
|
|
Phone and Network-Wikipedia
The most commonly
recognized registered jack is the RJ11. This is a modular
connector wired for one telephone line, using the center two
contacts of six available positions, and is used for single-line
telephones in homes and offices in most countries. RJ14 is similar
to RJ11 but is wired for two lines and RJ25 has three lines. RJ61
is a similar registered jack for four lines.
|
|
RJ-11
- Telephone
Description:
The RJ11
standard dictates a 2-wire connection. It is the
communication standards that lets telephone lines to carry
digital, voice, video, and network services.
RJ112-SPL
Data Sheet
|
|
RJ-11
- Telephone
Description:
Connects
three phone devices to a single jack. No
loss of signal quality. Simple plug-in installation.
RJ113-SPL
Data Sheet
|
|
RJ-11
- Telephone
Description:
RJ11 6P4C Male Plug to 4x 6P4C Female Outlet. 80
x 25x 25mm / 3.1" x 1" x 1" (LWH); Cable Length :
13cm / 5.1"
RJ114-SPL
Data Sheet
|
RJ-11
- Telephone
Description:
By simply
plugging it into any modular jack, the adapter permits a quick
plug-in installation of up to five telecom devices to a single
phone jack. The adapter is compatible with telephones, answering
machines, fax machines, modems, caller ID and more!
RJ115-SPL
Data Sheet
|
|
See: Routers / Switches
|
|
|
Phone
Connecting Block
Description:
Connecting block enables you to quickly
interconnect phone lines and communication cables.
TELCO-BLK
Data Sheet
|
66
Punchdown Block with Clear Protective Cover
Description:
66 punch down
block supports a full range of low-voltage applications
including voice, data, and security. Terminate different
type of connections in a single, convenient, space-saving block.
Contains four rows of IDC style clips for terminations.
66BLOCK Data
Sheet
|
|
RJ45
10/100
Description:
Connect two 10/100
Ethernet devices to a single Cat5/Cat5e cable drop. The
RJ45SPLITTER 2-to-1 RJ45 Splitter Cable Adapter increases the
number of RJ45 network connections on an RJ45 outlet, allowing two
10/100 Ethernet signals through a single Cat5/Cat5e wire.
On one
end of the installation the splitter enables you to connect two
patch cables from a hub or switch to a single port on a patch
panel; while on the other end of the installation the splitter
connects to a single Cat5/Cat5e network drop through a wall outlet
which can then be split and connected to two separate devices. The
patch panel and wall outlet are connected through a single
Cat5/Cat5e cable.
RJ45-10100
Data Sheet
|
RJ45 10/100/1000
Description:
The
BT-CAT5-R0512 Power-Over-Ethernet (PoE) Splitter/Tap delivers both
data and DC power to non-PoE equipped Ethernet devices using a
single CAT5 cable. This eliminates the need to place an Ethernet
enabled device such as a wireless access point or IP camera near a
power outlet, giving you more freedom in placement.
RJ45-101000
Data Sheet
|
|
CAT 5E
& CAT 6E Patch Panels
Description:
12-port
Vertical Cat6 Mini Patch Panel, 110 Type (568A/B
Compatible)
Compact vertical rack mountable 12 port Cat 6 patch panel.
48-port Cat6 Patch Panel, 110 Type (568A/B Compatible)
AT6- 2 ports w/bracket
CAT6-24 ports
CAT6-48 ports CAT5E-24 ports-1.75”H x 19”W CAT5E-48 ports - 3.5”H x 19”W
CAT5E-96 ports-7”H x 19”W
NETX12P Data
Sheet
|
CAT
5E 12 Port Vert. Patch Panel
Description:
12-port
Vertical Cat6 Mini Patch Panel, 110 Type (568A/B
Compatible)
Compact vertical rack mountable 12 port Cat 6 patch panel.
48-port Cat6 Patch Panel, 110 Type (568A/B Compatible)
AT6 - 2 ports w/bracket
CAT6 - 24 ports
CAT6 - 48 ports CAT5E - 24 ports - 1.75”H x 19”W
CAT5E - 48 ports - 3.5”H x 19”W
CAT5E - 96 ports - 7”H x 19”W
NETX148P Data
Sheet
|
|
See:
Hubs / Controllers
|
See:
Routers / Switches
|
Band Separators-Wikipedia
|
|
75-300
ohm UHF/VHF
Description:
Signal Band
Separator UHF VHF FM 75 Ohm TV Antenna Splitter Adapter Coax Input
to 300 Ohm Output, Gold Connectors: Satellite TV Equipment Signal
Separator Combiner Splitter UHF/VHF 75 - 300 Ohm Band Separator
Antenna Band Separator 300 to 75/300 Ohm TV UHF VHF
UF75 Data
Sheet
|
|
UHF/VHF/FM
with FM tap off 300 input/ 300-300 output
|
|
UHF/VHF
300 input/300-75 output
Description:
Signal Band
Separator UHF VHF FM 75 Ohm TV Antenna Splitter Adapter Coax Input
to 300 Ohm Output, Gold Connectors: Satellite TV Equipment Signal
Separator Combiner Splitter UHF/VHF 75 - 300 Ohm Band Separator
Antenna Band Separator 300 to 75/300 Ohm TV UHF VHF
UF75-300 Data
Sheet
|
|
UHF/VHF/FM
300-300 input/300 output
Description:
Signal Band
Separator UHF VHF FM 75 Ohm TV Antenna Splitter Adapter Coax Input
to 300 Ohm Output, Gold Connectors: Satellite TV Equipment Signal
Separator Combiner Splitter UHF/VHF 75 - 300 Ohm Band Separator
Antenna Band Separator 300 to 75/300 Ohm TV UHF VHF
UF300 Data
Sheet
|
|
|
|
|
|
|
|
See: UHF / VHF / FM
|
See: Combiners / Joiners
|
|
See: Splitters / Dividers
|
|
See: Multi-Switches
|
|
See: Misc. Products
|
See: Connectors
/ Fittings
|
|
See: Rack Mount
|
See: Cable & Wire
|
|
|
|
|
|
|
|
|
|
|
Splitter CATV,
Satellite, DirecTV, Dish Network Splitter
5-3000 MHz (3 GHz) High Frequency Splitter-Wikipedia. Recommended for broad-band services,
All port, Passive, High Low, Single high-speed cable and satellite Internet or any other service where unwanted signal
degradation-Wikipedia
is a factor Splitter Satellite/Digital TV
5MHz-2.3GHz-Wikipedia
|
|
|
About
Satellite | Government
|
Custom
Built |
RX/TX |
About
Us |
Contact Us
Call Today: (954) 941-8883 
