Mount Pole the tripod Stand Long base plate pole mast and tower wall the pipe mount roof NPRM Non-pen Home
     About Satellite  |  Government  |  Custom Built  |  RX/TX  |  About Us  |  Contact Us                    
 

Satellite Satellite Pole Mount 1 5/8" OD, 72" Long · Directv J-Mount Mast For Slimline Dish with Long and Short Brace · Custom Length

 

The Largest Selection    J-Mount Mast For Slimline Dish Dish Network Portable/Roof Mountable Satellite TV Antenna Satellite Mounts - Dish Network KU Band C Band Directv Tripods, Non penetrating roof mount

 

 

 

      ANTENNAS

 

 

Wifi - Bluetooth
Cell / Mobile Phone
Special Application
Satellite / Parabolic
- Small Dish
- Medium Dish
- Large Dish
- Portable Dish
Dish Cover / Snow-Ice
Custom Built
UHF / VHF / FM

     AMPLIFIER

  Wifi - Bluetooth
Cell / Mobile Phone
Satellite / Parabolic
Custom Built
UHF/VHF - CATV - RF

      RECEIVERS

 

 

RF / Broadband Fiber
AV / Baseband Fiber
IF / L-Band Fiber
IRD / FTA and STB

      TRANSMITTERS

 

 

RF / Broadband Fiber
AV / Baseband Fiber
IF / L-Band Fiber
Misc.

      FEEDHORN

 

 

Tx/Rx Transmit Receive
Custom Built
Wave Guides
Satellite / Parabolic

       LNB's

 

 

Tx/Rx Transmit Receive
DBS / FTA / TVRO
PLL - Commercial
LNB - Bracket / Adaptor

       NETWORK

  IPTV
MODEMS
Routers / Switches
Hubs / Controllers
USB
Serial - RS232
PCi - COM
Wireless
Ethernet
Other IP Devices
Drivers
      ACCESSORIES
 

 

Enclosures
AC / DC
Engineering
Splitters / Dividers
Mounts & Hardware
Connectors / Fittings
Terminator / Attenuator
Meters & Scopes
Tools
Combiners / Joiners
Cable & Wire
Modulators
Covers & Heaters
Power Inserters
MultiSwitches
Motors & Positioners
IR - Infrared
CCTV / DVR’s
Grounding / Surge
Rack Mount
Channel Filter
Wall Plates
Satellite TELEPHONE
Misc. Products
     Helpful LINKs
 

 

Footprints
What Frequency
Latitude - Longitude
Phone Test Mode
Channels Transponders
Wifi Scanner
Satellite Chart
Dish Pointer
SATcalculator
Goodies
     GENERAL INFO
 

 

About Satellite
Archives
StoreCam
Home

 

 

    Track Fedex  Track UPS


Input: your comments and suggestions are always welcome.


 

Welcome to SatelliteDish.com  >> Catalog >> Accessories >> Mounts & Hardware

 >> Mounts & Hardware:Wikipedia

 

Mounts & Hardware

Types Mounting Accessories Antenna bracket systems and Dish Mounting Gear Satellite dish/antenna mounting products Non Penetrating Roof Mount-Wikipedia DIRECTV Long Brace for DIRECTV Slim Line Dish (DTV DIRECTV Standard J-Mount Mast For Slimline Dish Dish Network Portable / Roof Mountable Satellite TV Antenna Satellite Mounts - Dish Network KU Band C Band Directv Tripods, Non penetrating roof mounts, towers, and universal wall roof mounts. Polar mount-Wikipedia for Satellite Satellite DUAL AXIS MOUNT Skyware Global - 1.2 AZ/EL 3" cap nonpen for Slimline - NPRMA3 - Mast Tower Tri-mast mounts mount pole mast dbs mount Andrews Mounts AZ/EL 3" cap NPRM, Pole Mount 1 5/8" OD, 72" Long · Directv J-Mount Mast For Slimline Dish with Long and Short Brace · Custom Length

Wall Mount - Penetrating & Non-Penetrating Roof Mount - Pole Mount - Antenna Mast - NPRM - Roof Mount - Pole - Eave Mast - Brackett-Wikipedia


 

 

 

Light Weight Tripod - Dish Stand

3' Foot Dish Tripod stand

$39.99

Description: Small light weight tripod you can set up in minutes. Actually it's quite annoying. It's too light so the wind blows it over. I really can't stand pointing a dish on this thing... Try to get the EZRV or just make one out of a flowerpot and fence pole. comes with detachable legs, level and compass but still not worth it.

WG3POD Data Sheet

 

 

Mobile Satellite portable Dish Satellite RV Satellite Motor Home Mini Dish tripod stand Bus camper satellite RV Dish Portable stand Tri-Pod Satellite Mobile

EZRV 2' Foot Dish Tripod

$39.00

EZRV 3' Foot Dish Tripod

$59.99
 
Description: This satellite dish tripod is made of heavy duty galvanized steel This satellite dish tripod works great where no drilling and permanent mounting is permitted. This tripod also works great with your camper or trailer satellite TV system. Ideal for RV owners. Self supporting heavy duty Tri-Pod tower made of 1-1/4" galvanized tubing. Spider mast holder attached to tri-pod legs with solid 1/4" bolts & special lock nuts.
 
3EZRV Data Sheet
 
 
 
 

 

 

 5' Foot Dish Tripod

EZRV 5' Foot Dish Tripod

  $65.95

Description: This satellite dish tripod is made of heavy duty galvanized steel. This satellite dish tripod works great where no drilling and permanent mounting is permitted. This tripod also works great with your camper or trailer satellite TV system. Ideal for RV owners. Self supporting heavy duty Tri-Pod tower made of 1-1/4" galvanized tubing. Spider mast holder attached to tri-pod legs with solid 1/4" bolts & special lock nuts.

5EZRV Data Sheet

 

 

 

Satellite tripod

EZRV 10' Foot Dish Tripod

  $98.95

Description: This satellite dish tripod is made of heavy duty galvanized steel. This satellite dish tripod works great where no drilling and permanent mounting is permitted. This tripod also works great with your camper or trailer satellite TV system. Ideal for RV owners. Self supporting heavy duty Tri-Pod tower made of 1-1/4" galvanized tubing. Spider mast holder attached to tri-pod legs with solid 1/4" bolts & special lock nuts.

210EZRV Data Sheet

 

3 foot Tri-pod Mount for Satellite Dish

 King Pole - Tripod Mount

$139.99

Description: The tripod satellite stand features a totally independent turning mechanism for turning any portable satellite dish with a diameter of up to 90cm while maintaining elevation alignment. Comes complete with ground pegs for added stability. It's lightweight design easily folds down to minimize storage space.

KP3MINI Data Sheet

 

 

Eave Mount Extends up to 36" Inch

Eave Mount Extends up to 36" Inch

$99.00

Description: For use in satellite Installations. Extends up to 36" Inches from wall. Wall base plate 5"x7". Insert Plate 5"x7". Mounting insert extends from 24" to 36". Mounting hardware included. Insert can be cut to shorten mount. Powder coated. Adapter Plate for DTV or Dish Network Shipping Dimensions 26"x9"x6" *J-Pipe not included

EAVEMOUNT36 Data Sheet

 

 

 

Basic 18" DBS system mount
Basic 18" DBS system mount

  $22.95

Slimline 2" mast

$39.00

Description: This is the standard mount that comes with the DirecTV or Dish Network System. Can be used for permanent or temporary installations. Accommodates most installs. Basic DBS antenna base. UPS shippable. DirecTV & Dish Network Systems. 1 5/8" outer diameter mast.

B18DBS Data Sheet

 

 

 

Basic 24" DBS system mount
Basic 24" DBS system mount

  $32.95

Description: This is the standard mount that comes with the DirecTV or Dish Network System Can be used for permanent or temporary installations. Accommodates most installs. Basic DBS antenna base. UPS shippable. DirecTV & Dish Network Systems.

B24DBS Data Sheet

 

 

DISH - Satellite : Long pole mount

DBS Long Pole Mount

$39.99 

Description: It gets your dish out and up and around. Right where you need it to be. In this picture it is placed next to a standard 18" pole mount. UPS shippable. If you need your dish up & out more than this mount is for you. Can be bolted into your existing base foot already mounted on the wall. Just change the pole.

JPOLE Data Sheet

 

 

 

18-36" Dish Wall or Roof Mount

30" Wall Mount 1836

$69.99

Description: Wall Mount / Roof Mount  fits standard 18" inch Dish  to 36" inch Dish- Also other misc. antenna applications. Mounts to wall or floor / roof. Call Today. Can be used for permanent or temporary installations. Accommodates most installs. Basic wall antenna base. UPS shippable.

B30WALL Data Sheet

 

 

 

Wall Mount Stand 1 Meter Dish Wall Mount

1.0 Meter Wall Mount 8510

$234.95

Description: Wall Mount / Roof Mount  fits standard .8 Meter Dish  to 1.0 meter Dish- Also other misc. antenna applications. Mounts to wall or floor / roof. Call Today. Can be used for permanent or temporary installations. Accommodates most installs. Basic wall antenna base. UPS shippable.

100WALLMNT Data Sheet

 

 

1.2 Meter Dish Satellite Wall Mount.

1.2 Meter Wall Mount 1020

$289.99

  2.4 Meter Wall Mount

Description: Wall Mount / Roof Mount  fits standard 1.1 Meter Dish  to 1.2 Meter Dish- Also other misc. antenna applications. Mounts to wall or floor / roof. Call Today. Can be used for permanent or temporary installations. Accommodates most installs. Basic wall antenna base. UPS shippable.

120WALLMNT Data Sheet

 

 

 

Non-Penetrating roof mount

Smaller Antenna Non-Penetrating Roof Mount

  $89.95

Description: Non-penetrating roof mount for DBS. Will hold 18,24,36 inch DBS antenna. Using standard 40lb cinder blocks it will withstand high wind environments. UPS shippable. Base frame non-penetrating Roof mount for Dish 46cm to 60cm dish. - 6 concrete blocks required.

NP1601 Data Sheet

 

 

STAND MOUNT PIPE POLE MAST STEEL BASE TRI SAT DISH

We can custom make any size bracket for you

$CALL

Description: We also have larger poles: DirecPC, Starband, Direcway, V-SAT and other larger and elliptical dishes. Please call.

CSTMNT Data Sheet

 

 

 

 

Non-Penetrating roof mount

36" Inch Non-Penetrating Roof Mount
NP1602

  $99.95

Description: Non-penetrating roof mount for DBS. Will hold 18,24,36 inch DBS antenna. Using standard 40lb cinder blocks it will withstand high wind environments. UPS shippable. Works with DirecTV, DirecPC, Primestar, & Dish Network.

NP-1602 Data Sheet

 

 

 

Non-Penetrating roof mount

1.0 Meter Non-Penetrating Roof Mount

$169.00

Description: The 611617401 has a 60 mm (2.38") O.D. mast and a 36" x 36" base,

611617401 Data Sheet

 

 

 

Non-Penetrating roof mount

1 - 1.2 Meter Non-Penetrating Roof Mount

$249.00

Description: The 611617402 has a 60 mm (2.38") O.D. mast and a 36" x 36" base, Includes rubber roof pad.

611617402 Data Sheet

 

 

 

 

1.2 m Non-Penetrating Roof Mount

1.2 Meter Non-Penetrating Roof Mount

$298.99

1.2 Meter Non-Penetrating Roof Mount with rubber roof pad

$399.98  

Description: Model 611006302 has a 73 mm (2.88") O.D. mast and a 1.6 m x 1.6 m (63" x 63") base when assembled.

611006302 Data Sheet

 

 

 

1.8 m Non-Penetrating Roof Mount

1.8 Meter Non-Penetrating Roof Mount

$799.00

Description: MODEL 6PT12 - Post-Tension Type 4.5 "O.D. mast 129" x 92.5" 

61100630 Data Sheet

 

 

 

1.8 m Non-Penetrating Roof Mount

1.8 Meter Non-Penetrating Roof Mount with rubber roof pad

$899.00

Description: MODEL 6PT12 - Post-Tension Type 4.5 "O.D. mast 129" x 92.5" 

61100631 Data Sheet

 

 

 

 

2.4 m Non-Penetrating Roof Mount

2.4 Meter Non-Penetrating Roof Mount

$1,295.00

Description: (Single Trays) Model NP-S240 has a custom  O.D. mast and a 2.0 m x 2.0 m (78" x 78") base when assembled.

NP-S240 Data Sheet

 

 

 

2.4 m Non-Penetrating Roof Mount

3 - 3.7 Meter Non-Penetrating Roof Mount

$1,295.00

Description: (Single Trays) Model NP-S370 has a custom O.D. mast and a 2.0 m x 2.0 m (78" x 78") base when assembled.

NP-S370 Data Sheet

 

 

 

2 Trays Non-Penetrating Roof Mount

2 Trays Non-Penetrating Roof Mount

$1,795.00

Description: (2 Trays) is a non-penetrating mount for ground and roof-top site installations. The mount with a optional (collar) mast size and is compatible with all satellite antenna models.

NP-240 Data Sheet

 

3 Trays Non-Penetrating Roof Mount

3 Trays Non-Penetrating Roof Mount

$2,395.00

Description: (3 Trays) is a non-penetrating mount for ground and roof-top site installations.  The mount with a optional (collar) mast size and is compatible with all satellite antenna models.

NP-370 Data Sheet

 

 

4 Trays Non-Penetrating Roof Mount

4 Trays Non-Penetrating Roof Mount

$4,295.00

Description: (4 Trays) is a non-penetrating mount for ground and roof-top site installations. The mount with a optional (collar) mast size and is compatible with all satellite antenna models.

NP-4370 Data Sheet

 

 

Penetrating Roof Mount

Penetrating Roof Mount

$1,299.00

Description: (Penetrating Roof Mount) is a penetrating mount for ground and roof-top site installations. The penetrating feet on the mount are anchored directly to the existing surface material or structure. The mount is commonly used with satellite antennas up to 3.7M+, wireless antennas, and solar applications for up to 125 sq ft of modules.

P-370 Data Sheet

 

 

 

Tactical Deploy Portable Mount

Tactical Deploy Portable Mount

$1,265.00

Description: The Tactical Deploy Mini Mount folds for compact transport and assembles in less than 5 minutes. The adjustable feet and legs on the stand create a stable mounting platform on rough or uneven terrain. The stand is used with satellite antennas up to 1.8M, wireless antennas and other applications, making it a very versatile solution.

TDPLY180 Data Sheet

 

 

Tactical Deploy Portable Mount

Tactical Deploy Portable Mounts

$CALL

Description: The Tactical Deploy Large Mount folds for compact transport and assembles in less than 5 minutes. The adjustable feet and legs on the stand create a stable mounting platform on rough or uneven terrain. The stand is used with satellite antennas up to 3M, wireless antennas and other applications, making it a very versatile solution.

TDPLY-300 Data Sheet

 

 

 

Large Dish Non Penetrating Roof Mount

Non Penetrating Roof Mount NP-10

$1,200.00

Description: Will support a 10-foot mesh antenna, includes a 3.5" OD mast pole as well as six ballast pads that hold 66 standard 40 lb. concrete blocks. The brace legs are adjustable to make it easier to plumb the pole. UPS shippable, Weight:312 lbs 4 pcs. Hundred weight qualified. Please call on current pricing. $1200.00 Box#1: 82lbs, 63Lx7Wx5H, Boxes 2&3:76 lbs., 80Lx18Wx7H -Box #4: 78lbs.63Lx9Wx8H

NP-10 Data Sheet

 

 

Mount Pole Mast Pipe Stand Tripod Satellite Dish Mount

We can custom make any size bracket for you

$CALL

Description: We also have larger poles: DirecPC, Starband, Direcway, V-SAT and other larger and elliptical dishes. Please call.

CSTMNT Data Sheet

 

 

King Posst Mount

King Post Mount

$1,299.00

Description: King Pole mechanically tested and field proven, these fully adjustable mounts exceed the performance requirements of demanding commercial applications. When assembled and mounted according to the installation instructions provided, these King Post Mounts are engineered to withstand 125 mph winds.

KPM Data Sheet

 

 

 

Satellite Pole Mount

Satellite Pole Mount

$CALL

Description: Satellite Pole Mount, schedule 40 steel, schedule 80 steel, 3 1/2 O.D., 4 1/2 O.D., 5 1/2 O.D., 1 5/8 custom O.D. available, schedule 40 black steel pipe, brackets and engineering, custom welding, black steel or galvanized steel. Gibraltar mounts and large pedestal mounts also available.

SPM Data Sheet

 

 

Roof Protection - A Protective Layer between the Roof Surface and the Non-Penetrating Satellite Dish Roof Mount before Installation. Rubber rooftop pad mat NPRM roof mount pad durable.

Custom Roof Mat - Rubber Roof Pad

$CALL

Description: All sizes are available. Please call. Rubber Roof Pad. Designed to be placed under non-penetrating roof mounts. UV resistant, 1/8” thick recycled rubber. Protects roof and roof membrane. Non skid texture. This protective rubber mat is used for mounting non-penetrating dish mounts onto a flat roof. This rubber pad provides protection for the roof surface and stability. Protective Layer between the Roof Surface and the Non-Penetrating Satellite Dish Roof Mount before Installation. All sizes available.

NPCRP Data Sheet

 

 

Rubber Roof Pad - 24.5" x 39.0"

$34.99

Rubber Roof Pad - 37.5" x 37.5"

$49.00 

Rubber Roof Pad - 52.0" x 52.0"

$69.99

Description: Standard Roof Mat - Rubber Roof Pad. Designed to be placed under non penetrating roof mounts. UV resistant, 1/8” thick recycled rubber. Protects roof and roof membrane. Non skid texture. This protective rubber mat is used for mounting non-penetrating dish mounts onto a flat roof. This rubber pad provides protection for the roof surface and stability. Protective Layer between the Roof Surface and the Non-Penetrating Satellite Dish Roof Mount before Installation. All sizes available.

NPRMPAD Data Sheet

 

 

 

Penetrating roof mounts (PRM, NPRM or NPMM), non-penetrating mounts, ridge or peaked roof mounts, wall mounts, pedestal mounts, pole mounts

 Custom Non Penetrating Roof mount

$CALL

Description: Custom Steel Non Penetrating Roof mount. Satellite roof mount This is the Non-Penetrating Roof Mount is made to order custom footprint and custom mast diameter. Can have adjustment of mast pitch. Non-penetrating roof mount for Wireless, Cable, DBS, VSAT, Display, CCTV or Other. Optional mast size. For temporarily setup or Roof Mount Base to safety and securely install dish antennas on flat roofs where drilling holes isn't an option. Custom - Please Call. Roof-Top Mounts, Penetrating Non-Penetrating Rooftop Mount, Roof Frames, Tripod, Camera stand Tripod Mount, Mounting Bracket Kit, Wireless Antenna Mount.

SMNP100 Data Sheet

 

 

Bracket SAT stand wall.

Custom Wall Bracket

$CALL

Description: We can custom make any size wall mount bracket it for you. Please call. Accessories - Eave Mounts - Ground Poles - Pipe Adapters - Roof Mounts - Tower Mounts - Heavy Duty Eaves Mount - Large Overhang Mount - Short J-Pipes 1.66", 2" & 2 3/8" - Support Struts - Rubber Roof Mats - Rubber Roof Mats - Extended J-Pipe - Adapter Plate - Support Bracket - Pipe Adapters - Pipe Extension Sleeve - Patio Mount - Peak Mount - Eaves Mounts - Non-Penetrating Roof Mounts - Pipe Adapters, Off-Air Antenna Mounts - Ground Poles.

CSTWB Data Sheet

 

 

Satellite Dish Cart

Custom Fabrication - Carts and Stands

$259.00

Description: For efficient custom welding services and quality steel. Custom Fabrication. All stainless, aluminum, and steel. Custom Design option for service and utility carts - custom steel and stainless steel carts for your organization's next project. Try our high-quality Satcart mini or use our custom welding services. Regardless of the type of project, we accommodate custom products for galvanized steel, mild steel, aluminum and stainless steel welding and fabrication. TV and Satellite dish antenna or equipment stands.

SATCART-Mini Data Sheet

 

 

 

Satellite Bracket custom length wall mount for a satellite dish antenna

We can custom make any size bracket for you

$CALL

Description: Satellite Bracket custom length wall mount for a satellite dish antenna. Dish antenna wall Mount. Dish antenna wall mount, Tripod, Roof holder, Balcony stands, Masts, Penetrating roof mounts (PRM, NPRM or NPMM), non-penetrating mounts, ridge or peaked roof mounts, wall mounts, pedestal mounts, pole mounts, LNB Holders, ground stands. Satellite Dish Roof and Wall Mount - Satellite Mount - Pole stand mast - Dish Network KU Band C Band DirecTV Tripods, DirecTV J-Mount Mast For Slimline Dish with Long and Short Brace · Custom Length. Wall Mount - Penetrating & Non-Penetrating Roof Mount - Pole Mount.

CTJPIPE Data Sheet

 

 

 

2" Pipe Adapter - Fits over a 1.66" Mast or J Pole

2" Pipe Adapter - Fits over a 1.66" Mast or J Pole

$22.00

Description: Here's a really simple way use an existing pole to install a satellite dish! This Quick Pipe Adapter works great on SuperDish antennas. This unit is designed to fit a smaller pipe that is no less than 1-7/8" in diameter and a larger pole that is no more than 2-1/4" in diameter. Fits over a 1.66" mast or J-pipe. Nominal 2" OD x 12" Length (actual OD of 1.825") Installs in minutes... Step 1: Slide pipe onto existing pole 2: Tighten bolts to secure to existing pipe 3: Mount satellite dish onto the adapter pipe.

166-2INCH Data Sheet

 

 

 

Pipe Adaptor Sleeve 1.66" Inch OD

Pipe Adaptor Sleeve 1.66" Inch OD

$14.99

Description: A simple way to use an existing pole to install a satellite dish. Sturdy metal construction – Installs in minutes! Works great with Dish & DirecTV dishes. Simply slide pipe onto existing pole, tighten bolts to secure to existing pipe, and mount satellite dish onto the adapter pipe. Length: 8” | Outer Diameter: 1.66”

166ODSLV Data Sheet

 

 

Large Pole OD to Small Pole OD Adaptor

Large Pole OD to Small Pole OD Adaptor 

$CALL

Description: Here's a really simple way use an existing pole to install a satellite dish! This Quick Pipe Adapter works great on SuperDish antennas. This unit is designed to fit a smaller pipe that is no less than 1-7/8" in diameter and a larger pole that is no more than 2-1/4" in diameter. Fits over a 1.66" mast or J-pipe. Nominal 2" OD x 12" Length (actual OD of 1.825") Installs in minutes... Step 1: Slide pipe onto existing pole 2: Tighten bolts to secure to existing pipe 3: Mount satellite dish onto the adapter pipe.

12WALLBRT Data Sheet

 

 

Pipe Adaptor Sleeve 2 3/8" Inch OD

Pipe Adaptor Sleeve 2 3/8" Inch OD

$CALL

Description: A simple way to use an existing pole to install a satellite dish. Sturdy metal construction – Installs in minutes! Works great with Dish & DirecTV dishes. Simply slide pipe onto existing pole, tighten bolts to secure to existing pipe, and mount satellite dish onto the adapter pipe. Length: 8” | Outer Diameter: 1.66”

12WALLBRT Data Sheet

 

 

 

Pole Extender Dish Satellite

Pole Extender

$CALL

Description: Need additional height? Can be cut to length. A simple way to use an existing pole to install a satellite dish. Sturdy Steel construction – Installs in minutes! Works great with large dishes. Simply slide pipe onto existing pole, tighten bolts to secure to existing pipe, and mount satellite dish onto the adapter pipe. Custom Inside diameter, Custom outside diameter. Large selection of antenna mounting hardware, and satellite mounting hardware. Call for size and length options.

POLEEXT Data Sheet

 

 

Satellite 4 1/2 " to 3 1/2" OD Pole Reducer

4 1/2 " to 3 1/2" OD Pole Reducer

$CALL

Description: A simple way to use an existing pole to install a satellite dish. Sturdy Steel construction – Installs in minutes! Works great with large dishes. Simply slide pipe onto existing pole, tighten bolts to secure to existing pipe, and mount satellite dish onto the adapter pipe. Custom Inside diameter, Custom outside diameter. Large selection of antenna mounting hardware, and satellite mounting hardware. Call for size and length options.

423PR Data Sheet

 

 

 

3 1/2"OD to 4 1/2" OD Pole In-Larger Sleeve

3 1/2"OD to 4 1/2" OD Pole In-Larger Sleeve

$CALL

Description: A simple way to use an existing pole to install a satellite dish. Sturdy Steel construction – Installs in minutes! Works great with large dishes. Simply slide pipe onto existing pole, tighten bolts to secure to existing pipe, and mount satellite dish onto the adapter pipe. Custom Inside diameter, Custom outside diameter. Large selection of antenna mounting hardware, and satellite mounting hardware. Call for size and length options.

324PE Data Sheet

 

 

 

Pole Pipe Adaptor

Pipe Adaptor

$CALL

Description: A simple way to use an existing pole to install a satellite dish. Sturdy Steel construction – Installs in minutes! Works great with large dishes. Simply slide pipe onto existing pole, tighten bolts to secure to existing pipe, and mount satellite dish onto the adapter pipe. Custom Inside diameter, Custom outside diameter. Large selection of antenna mounting hardware, and satellite mounting hardware. Call for size and length options.

POLEADP Data Sheet

 

See: Engineering See: Windload & Ballast

 

 

4" Wall Mount UHF/VHF/DBS
4" Wall Bracket

  $12.95

Description: Economy mounts made of heavy zinc plated steel provides 4" Clearance complete with mounting hardware. Up to 1 3/4" mast, Or 2 1/4' mast. (SD-M3 Pole Needed.) UPS shippable.

4WALLBRT Data Sheet

 

 

 

8" Wall Mast Mount

Wall-Mount
8" Clearance

  $32.95

Description: Economy mounts made of heavy zinc plated steel provides 8" Clearance complete with mounting hardware. Up to 1 3/4" mast, Or 2 1/4' mast. (SD-M3 Pole Needed.) UPS shippable.

8WALLBRT Data Sheet

 

 

 

12" Wall Bracket Pole Clamp

12" Clearance

  $39.99

Description: Economy mounts made of heavy zinc plated steel provides 12" Clearance complete with mounting hardware. Up to 1 3/4" mast, Or 2 1/4' mast. (SD-M3 Pole Needed.) UPS shippable.

12WALLBRT Data Sheet

 

 

 

Custom Mounts - Call Today

18" Clearance

  $48.98

Description: Economy mounts made of heavy zinc plated steel provides 18" Clearance complete with mounting hardware. Up to 1 3/4" mast, Or 2 1/4' mast. (SD-M3 Pole Needed.) UPS shippable.

18WALLBRT Data Sheet

 

 

 

Para-Mount - Wall Mount pipe holder
20" Clearance

  $54.95

Description: Accommodates mast up to 2 1/4".Galvanized for durability and constructed of lightweight, high strength tub steel. Lower mount has angled brace for added support. Sized@ 8" 12" 18" & 20" it will withstand high wind environments. (SD-M3 Pole Needed.) UPS shippable. We can custom make any size bracket for you.

20WALLBRT Data Sheet

 

Custom Clearance Bracket

Custom Clearance

$CALL

Description: We can custom make any size bracket for you. Please Call.

 

Towers

.9' Top section 

  $169.00

3' Top section  

  $109.99

10' Tower section

  $149.29

3'4" Base for concrete

  $84.99

Hinged tower base

  $134.99

Eave bracket

$48.99

Description: ROHN BX series Towers are the most popular of the ROHN line. The BX towers come in a variety of configurations and styles.

10TWRSEC Data Sheet

 

 

 

 

Telescoping Masts Push Up
Telescoping Masts
20 Foot.

$129.00

30 Foot.

  $199.00

40 Foot.

  $265.00

50 Foot.

$299.00

Description: 1 1/4" Galvanized tubing. telescopic mast is made from high quality galvanized steel and is intended for mounting off-air TV, ham radio, MMDS and wireless internet antennas. The Easy Up masts are sturdy, durable, and easily assembled.

TSCOPEMAST20 Data Sheet

 

 

Antenna U-Bolt Pack - Call Today

U-Bolt Clamp Pack

$12.99

Description: U-bolt mounting clamp kit. contain 2 u-bolts w/ nut and washer and 2 mast clamp spacers. 

UBOLTCP Data Sheet

 

 

 

Mast U-Bolts

U-Bolt Pack

$6.99

Description: U-bolt mounting clamp kit. contain 1 u-bolts w/ nut and washer and 1 mast clamp spacers. 

SUBOLTCP Data Sheet

 

 

 

Polar Mount - Dish Ring Mount - Satellite Mount

Polar Mount 7.5' Mesh Dish

$299.99

Polar Mount 10' Mesh Dish

$499.00

HD Z-MOUNT Zinc with bolt pack center plate and shroud feedhorn cover

$449.99

Description: Satellite Ring Mount - Polar Mount for a 7.5' foot Black Mesh Dish. Takes the standard actuator motor arm to track the Satellite Clark Belt. C-Band Dish Polar Mount.

POLARMNT24 Data Sheet

 

 

Satellite Polar Mount - Ring Mount

Polar Mount 12' Mesh Dish

$599.99

12HD Z-MOUNT Zinc with bolt pack center plate and shroud feedhorn cover

$689.98  

Description: Satellite Polar Mount - Ring Mount C-Band Dish - Black Mesh Polar mount ring mount - Polar Mount for a 10' foot Black Mesh Dish. Takes the standard actuator motor arm to track the Satellite Clark Belt. Dish Polar Mount.

POLARMNT36 Data Sheet

 

 

 

 

 

Polar Mount

Polar Dish Mount 1.0 -1.2

$299.85

Description: Generic Satellite Polar Mount for Tracking with a linear actuator arm. Can be easily adapted for a 1.0 meter dish or a 1.2 meter offset Dish. Polar Mount for Channel Master 0.9, 1.0 & 1.2m dish. Actuator Arm/Motor NOT INCLUDED

GSMPOLAR Data Sheet

 

 

 

Satellite Polar Mount

Polar Mount 1.8 - 2.4

$399.99

Description: Generic Satellite Polar Mount for Tracking with a linear actuator arm. Can be easily adapted for a 1.0 meter dish or a 1.2 meter offset Dish.

GLRGPOLAR Data Sheet

 

Horizon to Horizon Mount

Horizon to Horizon Motor Mount

$1,200.00

Description: 160° of Travel Single axis motorized  Horizon to Horizon Satellite Mount. Patented self-tightening device for minimum backlash. Compatible with offset or prime-focus dish. Easy adjustment of east/west limits. Reliable reed switch, easy and user friendly installation. infinite Adjustments - 36 Volt DC Motor for Accuracy Heavy Duty Gearbox w/Chain Drive.

MDH2H160 Data Sheet

 

 

 

Horizon to Horizon Motor Mount for Satellite Antenna

Horizon to Horizon Mount

$1,200.00

Description: 160° of Travel Travel Time of 4 Min. 37 Sec. to Cover the Single axis motorized  Horizon to Horizon Satellite Mount. Patented self-tightening device for minimum backlash. Compatible with offset or prime-focus dish. Easy adjustment of east/west limits. Reliable reed switch, easy and user friendly installation. infinite Adjustments - 36 Volt DC Motor for Accuracy Heavy Duty Gearbox w/Chain Drive.

MDH2H160 Data Sheet

 

 

 

Horizon to Horizon Satellite Motor Mount

Horizon to Horizon Satellite Motor Mount

$1,600.00

Description: 160° of Travel Travel Time of 4 Min. 37 Sec. to Cover the 160° Arc Infinite Adjustments for Elevation for Precise Aiming Heavy Bronze Bushings for Extended Life Performance Four Strut Feed Assembly with Feed Collar 36 Volt DC Motor for Accuracy Heavy Duty Gearbox w/Chain Drive Eight Back Braces for Stability Available in 16 tab design for both DH one-piece and sectional antennas. Optional: Motorized Power Declination for Tracking Inclined Orbit Controllers w/Two Speed Motor control for Pinpoint Accuracy, Non-Volatile Memory, Polorotor Interface, and Software Controlled Limits TX stand or Base Post Hot Dip Galvanizing Non-Penetrating Roof Mount Electronics, Feed Horns, LNBS, Controllers, Cabling Half Dish Deicing, dishes. 

DH2H160 Data Sheet

 

Horizon to Horizon Satellite Actuator

Horizon to Horizon Motor Mount Series + Motorized Declination

$2,400.00

Description: 160° of Travel Time of 4 Min. 37 Sec. to Cover the 160° Arc Infinite Adjustments for Elevation for Precise Aiming Heavy Bronze Bushings for Extended Life Performance Four Strut Feed Assembly with Feed Collar 36 Volt DC Motor for Accuracy Heavy Duty Gearbox w/Chain Drive Eight Back Braces for Stability Available in 16 tab design for both DH one-piece and sectional antennas. Optional: Motorized Power Declination for Tracking Inclined Orbit Controllers w/Two Speed Motor control for Pinpoint Accuracy, Non-Volatile Memory, Polorotor Interface, and Software Controlled Limits TX stand or Base Post Hot Dip Galvanizing Non-Penetrating Roof Mount Electronics, Feed Horns, LNBS, Controllers, Cabling Half Dish Deicing, dishes. 

DH2HD160 Data Sheet

 

 

 

Horizon to Horizon Chain Drive Mount

Horizon to Horizon Chain Drive Mount

$CALL

Description: 180° of Travel Time Single axis motorized  Horizon to Horizon Satellite Mount. Patented self-tightening device for minimum backlash. Compatible with offset or prime-focus dish. Easy adjustment of east/west limits. Reliable reed switch, easy and user friendly installation. infinite Adjustments - 36 Volt DC Motor for Accuracy Heavy Duty Gearbox w/Chain Drive. 

H2HCD Data Sheet

 

 

Dual Axis Horizon to Horizon Chain Drive Mount

Dual Axis Horizon to Horizon Chain Drive Mount

$CALL

Description: 180° / 0-90° of Travel Dual axis motorized  Horizon to Horizon Satellite Mount. Motorized Power Declination for Tracking Inclined Orbit Satellites. Patented self-tightening device for minimum backlash. Compatible with offset or prime-focus dish. Easy adjustment of east/west limits. Reliable reed switch, easy and user friendly installation. infinite Adjustments - 36 Volt DC Motor for Accuracy Heavy Duty Gearbox w/Chain Drive.

DAH2HCD Data Sheet

 

 

 

Horizon to Horizon Motor Mount for Satellite Antenna

Horizon to Horizon Motor Mount for Satellite Antenna

$1,200.00

Description: Single axis motorized  Horizon to Horizon Satellite Mount. Patented self-tightening device for minimum backlash. Compatible with offset or prime-focus dish. Easy adjustment of east/west limits. Reliable reed switch, easy and user friendly installation. infinite Adjustments - 36 Volt DC Motor for Accuracy Heavy Duty Gearbox w/Chain Drive.

SMR-1224 Data Sheet

 

 

Horizon to Horizon Motor Dual Axis Satellite Mount

Horizon to Horizon Motor Dual Axis Satellite Mount

$1,400.00

Description: Dual axis motorized  Horizon to Horizon Satellite Mount. Motorized Power Declination for Tracking Inclined Orbit Satellites. Patented self-tightening device for minimum backlash. Compatible with offset or prime-focus dish. Easy adjustment of east/west limits. Reliable reed switch, easy and user friendly installation. infinite Adjustments - 36 Volt DC Motor for Accuracy Heavy Duty Gearbox w/Chain Drive.

SMR-1224EL Data Sheet

 

 

 

Dual Axis Satellite Actuators

Dual Axis Satellite Actuators

$CALL

Description: This is a heavy-duty, 12-inch, 2-inch tube Super Jack Linear Actuator. Recommended for elevation or declination adjustment of polar mount or AZ/EL type dishes. Track the Clarke Belt with confidence by motorizing a 2nd axis of control in your polar mount dish setup. 36V motor operation 1200lbs maximum load 12-inch jack extension 2-inch outer tube Single Screw Adjustment Limit Super Reed Sensor Superior anti-rust coating Excellent water proofing. Includes weather rubber accordion boot. Recommended for elevation/declination control of 240cm, 300cm or 350cm diameter dishes.

TSAH36 Data Sheet

 

 

 

Inclined Orbit Satellite Tracking Actuator

Inclined Orbit Satellite Tracking Actuators

$CALL

Description:  

  • Dual axis motorized mount is available.
  • Patented self-tightening device for minimum backlash.
  • Compatible with offset or prime-focus dish.
  • Easy adjustment of east/west limits.
  • Reliable reed switch, easy and user friendly installation.

TSAH36 Data Sheet

 

Antenna Research

Antenna Research

At Antenna Research , we design, develop, and manufacture Antennas and RF Systems for both military and civilian applications. ARA supplies antennas for Communication Networks, RF Surveillance, RF Jamming, Public Safety Networks, and Civilian markets. ARA products cover all of the commercial and military frequency bands from 10 Hz to 80 GHz. Antennas optimized for specific bands, as well as multi-octave antenna systems are available for fixed, mobile, and tactical applications.

Communication-Wikipedia  RF Surveillance-Wikipedia  RF Jamming-Wikipedia


 

AEC-15A

AEC-15A
Portable, Lightweight
Elevation over Azimuth Positioner

$CALL

Description: The AEC-15A is a self-aligning, portable positioner for line-of-sight or satellite communication links. The positioner can be equipped with up to a 3’ solid parabolic dish, 6’ flat panel, or 5’ mesh antenna.

AEC-15A Data Sheet

 

 

Elevation-over-Azimuth Positioner

EAR-1000
Elevation-over-Azimuth Positioner

$CALL

Description: The EAR/EAP-1000-SYS consists of the Elevation-over-Azimuth Positioner, controller (ACU-3D-24) and cables required for power and control of the positioner. The load capacity of the system is 1000 lbs with a 5g vertical shock rating. It is designed to meet Mil-STD-810E and will provide reliable operation in outdoor environments.

EAR-1000 Data Sheet

 

 

Remote Alignment of Microwave Antennas.

Remote Alignment of Microwave Antennas

$4,200.00

Description: The AEC-7 allows for remote alignment of microwave antennas. Set up for point-to-point or multipoint links faster and maintain the highest link margins. The AEC-7 uses Power over Ethernet (PoE) to both power and remotely control the positioner from anywhere on the network.

AEC-7 Data Sheet

 

 

 

Remote Alignment of Microwave Antennas

Remote Alignment of Microwave Antennas

$CALL

Description: The AEC-8 allows for remote alignment of microwave antennas. Set up for point-to-point or multipoint links faster and maintain the highest link margins. The AEC-8 uses Power over Ethernet (PoE) to both power and remotely control the positioner from anywhere on the network.

AEC-8 Data Sheet

 

 

 

Elevation-over-Azimuth Positioner

EAR-1200
Elevation-over-Azimuth Positioner

$CALL

Description: The EAR-1200-SYS consists of the Elevation-over-Azimuth Positioner, controller (ACU-3E-24) and cables required for power and control of the positioner.  The load capacity of the system is 2300 lbs with a 5g vertical shock rating. It is designed to meet MIL-STD-810 and will provide reliable operation in outdoor environments. An azimuth slip ring with a 4” ID allows coaxial or waveguide rotary joints.

EAR-1200 Data Sheet

 

 

 

Elevation-over-Azimuth Positioner

EAR-1250
Elevation-over-Azimuth Positioner

$CALL

Description: The EAR-1250-SYS consists of the Elevation-over-Azimuth Positioner, controller (ACU-3E-24) and cables required for power and control of the positioner. The load capacity of the system is 5000 lbs with a 5g vertical shock rating. It is designed to meet MIL-STD-810 and will provide reliable operation in outdoor environments. An azimuth slip ring with a 4” ID allows coaxial or waveguide rotary joints.

EAR-1250 Data Sheet

 

 

 

Elevation over Azimuth Positioner

$CALL

Description: The EAR-125 consists of the Elevation-over-Azimuth Positioner (EAR), controller (ACU-3D-24) and cables required for power and control of the positioner. The positioner is suitable for installations requiring up to a 1.8 meter antenna, weighing up to 200 lbs. The azimuth structure is configured to allow installation of slip rings and rotary joints along with a 5.00 inch diameter hole for the waveguide path to the elevation mechanism.

EAR-125 Data Sheet

 

 

 

Two-Axis Positioner

Two-Axis Positioner

$38,000.00

Description: The AEC-60D system consists of the Two-Axis Positioner AEC-60D, Control Unit (ACU-3C-24-C) and cables required for power and control of the positioner. The Positioner is ideally suited for mounting on extendable mast or tripod and provides up to 400° (+/-200º) of motion in the azimuth axis and from -20° to +90° in the elevation axis. Designed for reliable operation in rugged, deployed outdoor environments. The Control Unit can be remotely located to facilitate integration with customers system. Can be controlled locally using Front Panel controls or remotely via Serial Interface (RS-232, RS-422 or RS-485) using simple, well defined commands.

AEC-60D Data Sheet

 

 

 

Two Axis Azimuth-over-Elevation Positioner (AEP), controller (ACU-3D-24)

Two Axis Azimuth-over-Elevation Positioner (AEP), controller (ACU-3D-24)

$CALL

Description: The AEP-300 antenna positioning systems consists of a two axis Azimuth-over-Elevation Positioner (AEP), controller (ACU-3D-24) and cables required for power and control of the positioner. The AEP version provides continuous azimuth rotation and a generous 3.50 inch hole through the center for cables or waveguide to the unit being rotated. The elevation mechanism is designed to handle large counter levered loads and provides up to 1200 ft lbs of torque to accommodate this type of operation. This is a lightweight unit capable of supporting up to 300 lbs vertical load.

AEP-300 Data Sheet

 

ORBIT

ORBIT

ORBIT is a leading global provider of technology based Mission Critical integrated communication solutions. We develop, integrate and install end-to-end turnkey communication solutions and services for air, sea, land and space applications. Based on a customer-centric approach, we offer integrated turnkey solutions for defense, government and commercial organizations. 

Defense - Government - Commercial-Wikipedia


 

Excessive-Capacity, Highly Accurate Tracking Positioner

Excessive-Capacity, Highly Accurate Tracking Positioner

$CALL

Description: One of ORBIT’s largest positioner, AL-4058D is a highly accurate, self-contained elevation over azimuth tracking positioner designed to support massive antennas (5-7.5 meters in diameter). Accordingly, it is well-equipped to meet the demanding requirements of applications such as longer range telemetry tests and tracking of very high resolution LEO (Low Earth Orbit) satellites. The AL-4058D is a ground-based tracking solution, and is transportable to fit diverse application needs. Brushless motor and planetary gear assembly. Highly dynamic with zero backlash for highest accuracy. Elevation Over Azimuth axes configuration (stabilization is optional).

AL-4058D Data Sheet

 

 

 

Ultra-Capacity, Highly Accurate Tracking Positione

Ultra-Capacity, Highly Accurate Tracking Positioner

$1,600,000.00

Description: The AL-4048D is a highly accurate, self-contained elevation over azimuth tracking positioner designed to support massive antennas (7.5-10 meters in diameter). Accordingly, it is well-equipped to meet the demanding requirements of applications such as longer range telemetry tests and tracking of very high resolution LEO (Low Earth Orbit) satellites. The AL-4048D is a ground-based tracking solution, and is transportable to fit diverse application needs. The modular system can be modified to meet customers’ specific requirements based on ORBIT’s field-proven building blocks. The system is easy to assemble and dismantle and includes comprehensive BIT (Built-in-Test) capabilities for the entire pedestal.

AL-4048D Data Sheet

 

 

Heavy Duty, Highly Accurate Tracking Positioner

Heavy Duty, Highly Accurate Tracking Positioner

$1,264,000.00

Description: The AL-4034D is a highly accurate, self-contained elevation over azimuth tracking positioner designed to support large-sized antennas. Accordingly, it is well-equipped to meet the demanding requirements of applications such as longer range telemetry tests and tracking of high resolution LEO (Low Earth Orbit) satellites for earth observation missions. The AL-4034D is a ground-based tracking solution, and is transportable to fit diverse application needs. The modular system can be modified to meet customers’ specific requirements based on ORBIT’s field-proven building blocks. The system is easy to assemble and dismantle and includes comprehensive BIT (Built-in-Test) capabilities for the entire pedestal.

AL-4034D Data Sheet

 

 

Pedestal system with an internal Dual Drive

Pedestal system with an internal Dual Drive

$1,124,968.00

Description: The AL-4018D is a highly accurate, dual drive elevation over azimuth tracking positioner capable of supporting high torques with a relatively small pedestal. The AL-4018D may be ground-based, transportable or shipboard (with additional stabilization), which makes it suitable for diverse tracking applications such as test telemetry, tracking of earth observation LEO satellites, missile launch tracking and others. The modular system can be modified to meet customers’ specific requirements based on ORBIT’s field-proven building blocks. The system is built for easy assembly and dismantling and includes comprehensive BIT (Built-In-Test) capabilities for the entire pedestal.

AL-4018D Data Sheet

 

 

 

Single Drive El/Az Positioner

Single Drive El/Az Positioner

$962,000.00

Description: The AL-4018S is a highly accurate and cost-effective elevation over azimuth tracking positioner capable of supporting small to mid-range antenna sizes. The AL-4018S may be ground-based, transportable or shipboard (with additional stabilization), which makes it ideal for test telemetry and missile launch tracking applications. The modular system can be modified to meet customers’ specific requirements based on ORBIT’s field-proven building blocks. The system is built for easy assembly and dismantling and includes comprehensive BIT (Built-In-Test) capabilities for the entire pedestal.

AL-4018S Data Sheet

 

 

Digital Tracking Pedestal System

Digital Tracking Pedestal System

$CALL

Description: The AL-4016S is a highly accurate self-contained elevation over azimuth tracking solution that delivers high performance under the most demanding operational conditions. The AL-4016S may be ground-based, mobile, transportable or shipboard (with additional stabilization), which makes it suitable for a variety of applications. The system can be modified to meet customers’ specific requirements based on ORBIT’s field proven building blocks. The system is easy to assemble and dismantle and includes comprehensive BIT (Built-In-Test) capabilities for the entire pedestal.

AL-4016S Data Sheet

 

 

Digital Tracking Pedestal Solution

Digital Tracking Pedestal Solution

$CALL

Description: The AL-4012S is a portable light-weight solution for field-based applications that require highly accurate tracking capabilities, such as UAS command and control, telemetry and stabilized point-to-point RF communications. The AL-4012S is a self-contained elevation over azimuth tracking positioner that delivers high performance under the most demanding field conditions. The easy-to-deploy AL-4012S may be ground-based, transportable or shipboard (with additional stabilization) to fit your application needs.

AL-4012S Data Sheet

 

 

Single Drive El/Az Positioner

Digital Tracking Pedestal Solution

$CALL

Description: The AL-4018S is a highly accurate and cost-effective elevation over azimuth tracking positioner capable of supporting small to mid-range antenna sizes. The AL-4018S may be ground-based, transportable or shipboard (with additional stabilization), which makes it ideal for test telemetry and missile launch tracking applications. The modular system can be modified to meet customers’ specific requirements based on ORBIT’s field-proven building blocks. The system is built for easy assembly and dismantling and includes comprehensive BIT (Built-In-Test) capabilities for the entire pedestal.

AL-4018S Data Sheet

 

See: Motor & Positoners

 

 

 

 

Azimuth and Elevation Mount Channel Master Dish

Andrews Channel Master Mount AZ/EL 3" cap for all .9 to1.2 offset Dish

$134.00

Description:  Heavy-duty Azimuth and Elevation Dish Mount. AZ/EL Cap. For a Andrews, ASC Signal and Channel Master offset fiberglass dish.

ACMAZEL120 Data Sheet

 

1.8 Meter Dish Mount AZEL 4" cap

Channel Master ASC Signal 1.8 meter Azimuth and Elevation Mount 4" cap

$199.00

Description:  Heavy-duty Azimuth and Elevation Dish Mount. AZ/EL Cap. For a Andrews, ASC Signal and Channel Master offset fiberglass dish. 1.8 az/el cap # 61160320 HD 611603207 =  4" OD pole.

ACMAZEL180 Data Sheet

 

 

 

Pole Cap Offset Dish Mount AZ/EL

Hybrid mount 2 3/8" AZ/EL cap .9 to 1.2 offset Dish 

$99.99

Description: Azimuth and Elevation AZ/EL Cap. For a Andrews, ASC Signal and Channel Master offset fiberglass dish 611613101 ANDREW 2 3/8"

61001850 Data Sheet

 

 

 

Channel Master ASC Signal 2.4 meter Azimuth and Elevation Mount 6 3/8" cap

Channel Master ASC Signal 2.4 meter Azimuth and Elevation Mount 6 3/8" cap

$699.99

Description: 2.4 two peace AZ/EL cap 611611407 180lb 6.3/8th" OD pole

ACMAZEL240 Data Sheet

Slimline Eave Mount

$134.00

Description: DirecTV Slimline Under The Eave Mount - SLMTUE Includes 1 small monopole , 1 long monopole, Base and pole.

SLMTUE Data Sheet

 

 

 

 

DirecTV Roof Mount Eve Bracket - Under the Eve Slimline Mount

Includes Mono poles

$134.00 

Description: DirecTV Slimline Under The Eave Mount - SLMTUE Includes 1 small monopole , 1 long monopole, Base and pole.

SLMTUE Data Sheet

 

 

 

 

Slimline S-Tube Mount

Slimline S-Tube Mount

$99.00

Description: Slimline S-Tube SLMTSP Mount comes complete with all hardware needed. Nice looking DirecTV 5 LNB wall mount.

SLMTSP Data Sheet

 

 

 

 

Attaches to the side of your building

Attaches to the side of your building

$134.00 

Description: Slimline S-Tube SLMTSP Mount comes complete with all hardware needed. Nice looking DirecTV 5 LNB wall mount.

SLMTSP Data Sheet

 

 

 

 

 Slimline Mount AZ/EL/POL

Slimline Dish Mount

$75.00

Description: Slimline S-Tube SLMTSP Mount comes complete with all hardware needed. Nice looking DirecTV 5 LNB wall mount. Slimline dish mount with bolt pack does not include mast. What Size Pole for a Slimline  2"

SLMTSP Data Sheet

 

 

 

Mono Poles - Dish Support Arms

Monopole - Call Today

Mono Poles

Small Monopole 14"

$25.00

Long Monopole 26"

$32.00

MONOPOLE26 Data Sheet

 

 

 

See: Motor& Positoners

See: Rack Mount / Rack Furniture
See: Antennas See: Medium Dish

 

 

NPRM pole mast mount. Non Penetrating Roof Mount for Dish, Offset, Prime, Focus-Wikipedia Wall bracket clamp satellite 36 inch LNB holder roof pipe. Norsat Prodelin, VSAT, Non Penetrating and Penetrating Roof Mounts, Tripods, Stands, Poles, Brackets, Clamps and more for your satellite TV antenna systems. Satellite Mount - Pole stand mast - Dish Network KU Band C Band Directv Tripods, roof mount, towers, and universal wall mount. Satellite Pole Mount 1 5/8 OD, 72 Long · Directv J-Mount Mast For Slimline Dish with Long and Short Brace · Custom Length satellite mounting brackets-Wikipedia or clamps Ground Post Installation non pen tripod stand brace Excede Satellite Internet roof NPRM 2" Diameter Tube King pole mast antenna-Wikipedia and dish mount.

 Satellite and Broadband Parts and Products

 

 Non Penetrating Roof Mounts DIRECTV Long Brace for DIRECTV Slim Line Dish (DTV DIRECTV Standard J-Mount Mast For Slimline Dish Dish Network Portable/Roof Mountable Satellite TV Antenna Satellite Mounts
 HOME About Satellite | Government | Custom Built | RX/TX | About Us | Contact Us                          Call Today:  (954) 941-8883 
Copyright © 1995-2016 SatelliteDish.com All Rights Reserved.