Multiswitch - Satellite Multi-Switch

Multi-Switches

We have Satellite switches for as little as $5.99 please call. We would like to see that you get the right switch for the job and sometime cheep or less expensive is not always the best for your satellite. Common problems: Does it heat up? Does it make a clicking sound? Does it flex when you squeeze it? Will you be using it Indoors or Out? 

 

 

3x4 Multi-Switch

3x4 Multi-Switch

$39.99  3x4

Economical high quality solution for multiple receiver configuration  Combine terrestrial UHF/VHF signals with satellite I.F. For distribution on one cable.

 

4x8 Multi-Switch

4x8 Multi-Switch

 

Economical high quality solution for multiple receiver configuration. 2 satellite in and 8 receiver out.

 

 

All You Need

better 3x4 Multi-Switch

$59.99  3x4 Multi-Switch 

Better, high quality solution for multiple receiver configuration • Combine terrestrial UHF/VHF signals with satellite I.F. For distribution on one cable. •  Utilizes state of the art Pin Diode signal switching. •  Manufactured with Surface Mount Technology, this allows for excellent Thru Loss, Return Loss. 3 x 4 multi switch.

 

 

Dish LNB Switch

3x8 Soldered Back 

 

high quality solution for multiple receiver configuration • Combine terrestrial UHF/VHF signals with satellite I.F. For distribution on one cable. •  Utilizes state of the art Pin Diode signal switching. •  Manufactured with Surface Mount Technology, this allows for excellent Thru Loss, Return Loss. 3 x 8 multi switch.

 

 

Dish Switch - Call Today - 5x16 switch and More...

 

4x8 Switch w/Power supply

 

DIRECTV Approved This 4x8 multi-switch is specially designed to optimally interface with all DIRECTV® DIRECTVplus. Triples - Comes with power supply.

• This 4x8 multi-switch is sealed so it can be used either indoors or outdoors. 

$89.99

 

Slimline and more Dish Switch

 

DIRECTV 6X8 KA/KU Satellite Multi Switch DIRECTV Approved Wide Band Frequency Zinwell

6x8 Switch Flexport

 

DIRECTV Approved works with any type of LNB 6x8 multiswitch was designed to interface with 101/110/119W satellites plus additional inputs (2), Flexport 1 and Flexport 2. Flexports are used to interface with new DirecTV satellites such as 95 W and 72.5W.

 

 

6 x 16 Wide-band Satellite signal multiswitch

 

Zinwell Wide Band 6x16 Multiswitch

 

16 Outputs For The Ka/Ku Dish Antenna / Reads Satellites Ka 99-103 And Ku 101, 110, 119 / Flexport for the New DIRECTV Satellites Such As 95W And 72.5W

 

 

4 x 16 way switch

2x12 Multi-Switch

$169.99

• 2 inputs to 12 independent outputs Excellent for SMATV headends, as well as multi-room satellite only distribution.• F- ports all face in the same direction for installation versatility and ease of use.

 

 

 

 

 

 

16 way DirecTV multiswitch 5x16

5 in 16 out Multi-Switch
$269.99

5x16 switch $269.99

This is a 22KHz control Multi-Switch which works with Voltage from receivers. This design allows the reception of satellites from 2 or 3 orbital slots using multiple LNB in a residential or small SMATV applications. This model has a F-port power if extra power is needed. 
5 inputs consist of: 
1 x U/V ANT 
2 X 13/18V 
2 X 22KHz 13/118V  

 

 

Satellite USA WBS41202

Satellite USA WBS41202 Multi-Switch
$499.98

Satellite USA WBS41202NF 12 Way MultiSwitch for a 5 LNB DirecTV System 

12 way multiswitch for a 5 LNB DirecTV system.
Features:
For use with DirecTV's new 5 LNB satellite dish onlyWill distribute up to 12 independent satellite receiversOutdoor mountable Multiswitch will also work on DirecTV's older style satellite dishes and satellite receiversRemote powerable via power port

 

 

DirecTV 5 LNB TAP WBT410

Satellite USA WBT 410 DC Tap
$99.98

Tap off a system backbone and create multiple distribution options. DirecTV 5 LNB Tap

 

 

 

 

 

 

 

 

 

Rack Mount Multi Switch /Switch

 

Rack Mount Satellite LNB Switch

 

 

See: LNB Power AC / DC

See: In Line Satellite Amplifiers 

See: Active Splitters / Diplexer

See: Rack Mount Furniture

 

 

Multi Dish Switch

 

2x8 Rack Mountable MultiSwitch

4x8 Rack Mountable MultiSwitch

 

We Also have Active Splitters for providing power to the LNBs or Rack Mount In-Line Amps / Power Inserters. click here

TSMS-2150-4, 2150-4a, TSMS-2150x-16

 

 

 

Multi Dish Switch LNB 22Khz DiSEqC

 

2x16 Rack Mountable MultiSwitch

4x16 Rack Mountable MultiSwitch

 

  • 2x8 Rack Mount Switch
  • 3x8 Rack Mount Switch
  • 4x8 Rack Mount Switch
  • 5x8 Rack Mount switch
  • 2x16 Rack Mount Switch
  • 3x16 Rack Mount Switch
  • 4x16 Rack Mount Switch
  • 5x16 Rack Mount Switch

 

 

DiSEq & DiSEqC Switch - Multi-Dish Switches

 

 

4-Dish in + Cable/Local and 8 rec out.FTA ok !!!

 

9 in 8 out cascading multiswitch with power supply

9x9x8 

 4 Dish inputs ( That's four dual LNB in ) plus a input for Cable or local antenna UHF/VHF . Has output for 8 Eight receivers. Cascading 9 outputs for another switch if necessary. Switching commands compatible 13V,18V,13V/22KHz18V/22KHz DiSEqC2.0

 

 

 

13in and 12 rec output  Call Today

 

13 in 12 out cascading multiswitch with power supply

13x13x12 

$399.00

Compatible with all Dishpro LNBFs and FTA satellite Systems. Perfect for 6 Dish in (that's Six dual LNB in) plus locale UHF/VHF or Cable CATV input with the output good for 12 receivers. It has 13 going over to another switch if necessary. Cascadable DiSEqC Switching commands compatible 13V,18V,13V/22KHz18V/22KHz DiSEqC2.0 

17x17x16 Switch

17 in 16 out cascading multiswitch with power supply

17x17x16 

$499.00

Compatible with all Dishpro LNBFs and FTA satellite Systems. Perfect for 8 Dish in (that's Eight dual LNB in) plus locale UHF/VHF or Cable CATV input with the output good for 16 receivers. It has 17 going over to another switch if necessary. Cascadable DiSEqC Switching commands compatible 13V,18V,13V/22KHz18V/22KHz DiSEqC2.0 

 

Spaun DiSEqC 1.0 Switch

Spaun DiSEqC 1.0    2x1

$74.00

Spaun DiSEqC 1.0 Switch 2 Satellite / LNB Reception.

  • DiSEqC2.0  2x1
  • DiSEqC2.0  3x1
  • DiSEqC2.0  5x1
  • DiSEqC2.0  4x4
  • DiSEqC2.0  5x4
  • DiSEqC2.0  5x6
  • DiSEqC2.0  5x8

All DiSEqC 2.0 Switches Call for latest pricing.

 

DiSEqC 1.0 Switch

DiSEqC 1.0 Switch

$6.99   2x1 DiSEqC 1.0

Economy 2x1 DiSEqC 1.0 Switch
connect up to 2 satellite dishes (LNB's) to your FTA receiver.

 

DiSEqC1.0 switch

DiSEqC 1.0 Switch

$12.99  DiSEqC 1.0

Pansat 4x1 DiSEqC 1.0 Switch
connect up to 4 satellite dishes (LNB's) to your FTA receiver.

 

 

Pansat Multi Dish Switch

DiSEqC 1.1 Switch

$14.99   DiSEqC 1.1

Pansat 4x1 DiSEqC 1.1 Switch
connect up to 4 satellite dishes (LNB's) to your FTA receiver.

 

 

Pansat USA Multi Dish

DiSEqC 2.0 Switch

$19.99  DiSEqC 2.0

Pansat 4x1 DiSEqC 2.0 Switch
connect up to 4 satellite dishes (LNB's) to your DVB FTA receiver.

 

 

Spaun Switch 5x8

 

Spaun DiSEqC 2.0    4x1

Spaun DiSEqC 2.0 Switch 2 Satellite / LNB Reception.

 

 

 

 

Dish Spaun Multi

 

Spaun DiSEqC 1.0

  • 5x1 (Two satellite, one receiver, one UHF/CATV)
  • 5x4 (Two satellite, four receiver, one UHF/CATV)
  • 5x6 (Two satellite, six receiver, one UHF/CATV)

 

 

22Khz Tone Switch

 

2x4 and 4x4  satellite 22Khz Switch

$34.99  2x4   22Khz
$39.99  4x4 22Khz

22KHz Tone-Controlled Auto Switch.

DirecTV, DVB, 4DTV Compatible

Switches between two separate LNB feeds on the same or separate dishes

Used in signal routing in DSS, Ku, C, digital and analog environments

 

 

2x1 22khz Switch Dish Multi

 

2x1  22Khz Switch

$14.99    2x1  22Khz

22KHz Tone-Controlled Auto Switch.

DirecTV, DVB, 4DTV Compatible

 

 

 

 

 

 

 

Dish Network SW-21 Switch


SW21 Multi-Dish Switch
$27.99

 SW21

 

 

 

 

 

 

Dish Network DP-21 Switch

Dishpro DP21      $34.99

DP21

Multiswitch 21 KHz for Dish Network receivers and two dish antennas, any model. Provides satellite signals from multiple Dishes. complete your installation using a second dish antenna

 

Dish Network Dishpro SW34 DP34

Dishpro DP34 switch

$134.99

Dish Network DP34 switch. Please call on lastest Flex LNBF's and / or Flex Port Dish Network Switches.

 

 

 

 

 

DPP34 and DPP44 Switch

 

 Dish Network DishPRO Plus DPP44

 

4x4 Multiswitch & Power Inserter. DISH Pro Plus 44 Switch features DISH Pro Plus Technology, LNBF inputs supporting four orbital locations, four receiver outputs, expansion ports to connect additional switches, and a power inserter.

 

 

Dish Network DP44 switch

 

DP44 Switch

$199.99

The DISH Pro Plus 44 Switch
features DISH Pro Plus
Technology, LNBF inputs
supporting four orbital locations,
four receiver outputs, trunkable
ports to connect additional
switches, and a power inserter

 

 

Flex Switch Flex Port Multi

 

Flex34 

Four inputs for use with up to four orbital locations.•  Four outputs for connection to up to four independent inputs.• Passive "trunk" connections, to cascade to another flex34 Switch.•  Does not require power insertion. • Can be used indoors or outdoors.•  Off-Air input is HDTV & Flex compatible

 

 

 

SW64 Switch Dish Network

DISH NETWORK SW64 Switch    $139.99

$139.99

 

 

C Ku Switch - HV switch

 

2 X 1 C-Ku Switch

 

Power passing, 0/5v OR 0/12V switch Use it to connect 2 separate LNBs (or 2 dishes) that lead into one receiver unit. Can be used with most MPEG FTA DVB receivers with 0/12V output. FREQUENCY INSERTION: 900-2150mhz LOSS (dB): 3 ISOLATION (dB): 20 RETURN LOSS (dB): 10 OPERATION VOLTAGE: 12VDC

 

 

 

 

Spaun Spawn Satellite USA

 

SMS 5602NF

Spaun 5x 6 Multiswitch

  • HDTV compatible
  • SAT-IF with slope
  • Terrestrial push-pull
  • DUO-SAT system
  • IF Polarity selection is controlled by remote voltage, <14.5vV,>16vH & the 22kHz tone provided by the receiver
  • Synchronous level for SAT 0...-10dB
  • Return path compatible
  • Current consumption 40 mA
  • Power consumption 26 Watts

 

Spaun ka ku sitch - Slimline 5x 8 Multiswitch

 

SMS 5802NF

Spaun 5x 8 Multiswitch

  • HDTV compatible
  • SAT-IF with slope
  • Terrestrial push-pull
  • DUO-SAT system
  • IF Polarity selection is controlled by remote voltage, <14.5vV,>16vH & the 22kHz tone provided by the receiver
  • Synchronous level for SAT 0...-10dB
  • Return path compatible
  • Current consumption 40 mA
  • Power consumption 26 Watts

 

 

 

spaun satellite USA Dealer

 

SMS 51602NF

Spaun 5x 16 Multiswitch

  • HDTV compatible
  • SAT-IF with slope
  • Terrestrial push-pull
  • DUO-SAT system
  • IF Polarity selection is controlled by remote voltage, <14.5vV,>16vH & the 22kHz tone provided by the receiver
  • Synchronous level for SAT 0...-10dB
  • Return path compatible
  • Current consumption 40 mA
  • Power consumption 26 Watts

 

 

 

SAT Multi-Switch

 

SMS3403NF

SMS 3403 NF
Multiswitch, 3 In, 4 Out, Powered, w/VHF/UHF Amplifier

  • Combines a cable carrying VHF/UHF signals (from an antenna or CATV) with both cables from a dual LNB DSS satellite dish.
  • Outputs for up to four runs to satellite receiver boxes. (Requires SEW121 diplexer below at each receiver.)
  • Powered by internal AC power supply.
  • Powers satellite dish directly.
  • Built-in amplifier for DSS signals.
  • Built-in amplifier for VHF/UHF or CATV signals.(Adjustable gain, up to 8db!)

 

 

SAT LNB Switch

 

SMS3603NF

SMS 3403 NF
Multiswitch, 3 In, 6 Out, Powered, w/VHF/UHF Amplifier

  • Combines a cable carrying VHF/UHF signals (from an antenna or CATV) with both cables from a dual LNB DSS satellite dish.
  • Outputs for up to four runs to satellite receiver boxes. (Requires SEW121 diplexer below at each receiver.)
  • Powered by internal AC power supply.
  • Powers satellite dish directly.
  • Built-in amplifier for DSS signals.
  • Built-in amplifier for VHF/UHF or CATV signals.(Adjustable gain, up to 8db!)

 

 

SMS 3403 NF

SMS3803NF

SMS 3403 NF
Multiswitch, 3 In, 8 Out, Powered, w/VHF/UHF Amplifier

  • Combines a cable carrying VHF/UHF signals (from an antenna or CATV) with both cables from a dual LNB DSS satellite dish.
  • Outputs for up to four runs to satellite receiver boxes. (Requires SEW121 diplexer below at each receiver.)
  • Powered by internal AC power supply.
  • Powers satellite dish directly.
  • Built-in amplifier for DSS signals.
  • Built-in amplifier for VHF/UHF or CATV signals. (Adjustable gain, up to 8dB!)

     

    Best prices on spaun multiswitches 

 

 

 

Spaun 5x 12 Multiswitch

SMS51202NF

Spaun 5x 12 Multiswitch

  • HDTV compatible
  • SAT-IF with slope
  • Terrestrial push-pull
  • DUO-SAT system
  • IF Polarity selection is controlled by remote voltage, <14.5vV,>16vH & the 22kHz tone provided by the receiver
  • Synchronous level for SAT 0...-10dB
  • Return path compatible
  • Current consumption 40 mA
  • Power consumption 26 Watts

 

DMS 51202 NF
Multiswitch

 5 In, 12 Out, Powered,w/VHF/UHF Amplifier

 5 In, 16 Out, Powered,w/VHF/UHF Amplifier

 

 

Spaun Satellite multi Dish Switch

 

SMS281F

SMS341F

SMS361F

SMS2212F

 

spaun dish switch

 

 

SMS241F

SMS261F

SMS381F

 

The Largest Selection - Spawn And Satellite USA. please call for latest pricing. See: AC / DC

See: Diplexers - Splitters

 

http://www.SatelliteDish.com

Call Today (954) 941-8883

 

Satellite Parts1.2 1.8 and 2.4 Meter Dish Large SatelliteC-Band Black Mesh DishSwitch LNB Mount Feed ka ku c band FTA

2002 Copyright © SatelliteDish.com All rights reserved