4x8 Switch w/Power supply

DIRECTV Approved This 4x8 multi-switch is specially designed to optimally interface with all DIRECTVฎ DIRECTVplus. Triples.

Amplified 4x8 Multi-Switch

• Optional DC Power Supply •  Anodized Aluminum Housing •  Solid Cast F- Ports •  Pin-Diode Switching P4X8PH3 

DIRECTV Approved. 

SMS 5602NF

Spaun 5x 6 Multiswitch

• HDTV compatible
• SAT-IF with slope
• Terrestrial push-pull
• DUO-SAT system
• IF Polarity selection is controlled by remote voltage, <14.5vV,>16vH & the 22kHz tone provided by the receiver
• Synchronous level for SAT 0...-10dB
• Return path compatible
• Current consumption 40 mA
• Power consumption 26 Watts

SMS 5802NF

Spaun 5x 8 Multiswitch

• HDTV compatible
• SAT-IF with slope
• Terrestrial push-pull
• DUO-SAT system
• IF Polarity selection is controlled by remote voltage, <14.5vV,>16vH & the 22kHz tone provided by the receiver
• Synchronous level for SAT 0...-10dB
• Return path compatible
• Current consumption 40 mA
• Power consumption 26 Watts

SMS 51202NF

Spaun 5x 12 Multiswitch

• HDTV compatible
• SAT-IF with slope
• Terrestrial push-pull
• DUO-SAT system
• IF Polarity selection is controlled by remote voltage, <14.5vV,>16vH & the 22kHz tone provided by the receiver
• Synchronous level for SAT 0...-10dB
• Return path compatible
• Current consumption 40 mA
• Power consumption 26 Watts

SMS 51602NF

Spaun 5x 16 Multiswitch

• HDTV compatible
• SAT-IF with slope
• Terrestrial push-pull
• DUO-SAT system
• IF Polarity selection is controlled by remote voltage, <14.5vV,>16vH & the 22kHz tone provided by the receiver
• Synchronous level for SAT 0...-10dB
• Return path compatible
• Current consumption 40 mA
• Power consumption 26 Watts

6x8 Switch Flexport

DIRECTV Approved 6x8 multiswitch was designed to interface with 101/110/119W satellites plus additional inputs (2), Flexport 1 and Flexport 2. Flexports are used to interface with new DirecTV satellites such as 95 W and 72.5W.

5x8 Switch w/Power supply

40-2300MHZ, SUITABLE FOR DIRECTV, PHASE III, HDTV, AND SIMILAR SYSTEMS
IDEAL FOR RESIDENTIAL HOME THEATER, MDU, AND COMMERCIAL APPLICATIONS
COMBINES 4 LNB'S AND 1 ANTENNA INPUT
HIGH PERFORMANCE PIN DIODE SIGNAL SWITCHING
INCLUDES 24V POWER SUPPLY

2x12 Multi-Switch

• 2 inputs to 12 independent outputs •  Excellent for SMATV headends, as well as multi-room satellite only distribution.• F- ports all face in the same direction for installation versatility and ease of use.

2x16 Multi-Switch

• 2 inputs to 16 independent outputs •  Excellent for SMATV headends, as well as multi-room satellite only distribution.• F- ports all face in the same direction for installation versatility and ease of use.

This switch has 3/5 inputs 2 from the dish (Deluxe LNB) and 1 from CATV/UHF/VHF Provides a diplexer. Designed to provide satellite signals to multiple receivers as well as CATV/UHF/VHF signals. Designed to provide satellite signals from dish to multiple receivers. These switches allow for each receiver to be independently switched giving full channel reception to each receiver. DirecTV PhaseIII ok..__

5x8 out Multi-Switch
$169.99

22 KHz Continuous Tone output •  Solid Cast F-Ports • Coax Powered Inputs Built for Outdoor Use.

Hot

4 in 16 out Multi-Switch
$269.99 69.99

Here it is a 4x16  multiswitch DirecTV Approved multi-switch works great and you won't need a $500.00 spaun product works with all DirecTV 101,110,119 triple, PhaseIII or single LNB setups 

5 in 16 out Multi-Switch
$269.99

5x16 DirecTV Approved multi-switch works great and you won't need a $500.00 spawn product works with all DirecTV 101,110,119 triple, PhaseIII or single LNB setups 

• 2x4 MultiSwitch

• 3x4 Multiswitch

• 4x4 Multiswitch

• 5x4 Multiswitch

• 4x8 Multiswitch

• 5x8 Multiswitch

• 4x16 multiswitch

• 5x16 Multiswitch

• New Flex Switch and Flex LNB and more. In stock call today...

 If you need more than 16 receivers and don't have time for aggravation please try a Spaun Cascadeable Multi-Switch.

SMS 3403NF

SMS 3403 NF
Multiswitch, 3 In, 4 Out, Powered, w/VHF/UHF Amplifier

• Combines a cable carrying VHF/UHF signals (from an antenna or CATV) with both cables from a dual LNB DSS satellite dish.
• Outputs for up to four runs to satellite receiver boxes. (Requires SEW121 diplexer below at each receiver.)
• Powered by internal AC power supply.
• Powers satellite dish directly.
• Built-in amplifier for DSS signals.
• Built-in amplifier for VHF/UHF or CATV signals. (Adjustable gain, up to 8db!)

SMS 3603NF

SMS 3403 NF
Multiswitch, 3 In, 6 Out, Powered, w/VHF/UHF Amplifier

• Combines a cable carrying VHF/UHF signals (from an antenna or CATV) with both cables from a dual LNB DSS satellite dish.
• Outputs for up to four runs to satellite receiver boxes. (Requires SEW121 diplexer below at each receiver.)
• Powered by internal AC power supply.
• Powers satellite dish directly.
• Built-in amplifier for DSS signals.
• Built-in amplifier for VHF/UHF or CATV signals. (Adjustable gain, up to 8db!)
•  

SMS 3803NF

SMS 3403 NF
Multiswitch, 3 In, 8 Out, Powered, w/VHF/UHF Amplifier

• Combines a cable carrying VHF/UHF signals (from an antenna or CATV) with both cables from a dual LNB DSS satellite dish.
• Outputs for up to four runs to satellite receiver boxes. (Requires SEW121 diplexer below at each receiver.)
• Powered by internal AC power supply.
• Powers satellite dish directly.
• Built-in amplifier for DSS signals.
• Built-in amplifier for VHF/UHF or CATV signals. (Adjustable gain, up to 8dB!)

   

  Best prices on spaun multiswitches 

   

  The Largest Selection

DMS 51202 NF
Multiswitch

 5 In, 12 Out, Powered, w/VHF/UHF Amplifier

 5 In, 16 Out, Powered, w/VHF/UHF Amplifier

• New version works for either DirecTV (22kHz switching) or Dish Network (DiSEqC Switching) systems (not simultaneously.) Works with DirecTVฎ or DishProฎ
• Combines a cable carrying VHF/UHF signals (from an antenna or CATV) with all four cables from a DUO-dual LNB DSS satellite dish. (A dish specifically designed to pick up two satellites simultaneously.) Or from two dual-LNB dishes pointed in different directions.
• Outputs for up to twelve runs to satellite receiver boxes. (Requires SEW121 diplexer below at each receiver.)
• Powered by internal AC power supply.
• Powers satellite dishes directly.
• Built-in amplifier for DSS signals with variable attenuators on each satellite.
• Built-in amplifier for VHF/UHF or CATV signals with variable attenuator.

better 3x4 Multi-Switch

Better, high quality solution for multiple receiver configuration • Combine terrestrial UHF/VHF signals with satellite I.F. For distribution on one cable. •  Utilizes state of the art Pin Diode signal switching. •  Manufactured with Surface Mount Technology, this allows for excellent Thru Loss, Return Loss. 3 x 4 multi switch.

3x4 Multi-Switch

Isolated, high quality 3x4 multiswitch solution for multiple receiver configuration • Combine terrestrial UHF/VHF signals with satellite I.F. For distribution on one cable. •  Utilizes state of the art Pin Diode signal switching. •  Manufactured with Surface Mount Technology, this allows for excellent Thru Loss, Return Loss, Isolation & Group Delay. •  114mm x 106mm x 24.8mm •  40-2150 MHz

3x4 Multi-Switch

Economical, 3x4 multiswitch high quality solution for multiple receiver configuration • Combine terrestrial UHF/VHF signals with satellite I.F. For distribution on one cable.

Super economy satellite dish Multi-witch start at around $15.99 pleases call for latest pricing and availability. 

• with power supplies

• Amplification

• Tone Generators 

• More...

3 in 8 out Multi-Switch
$89.98

This switch has no power supply 3 inputs 2 from the dish (Deluxe LNB) and 1 from CATV/UHF/VHF Provides a diplexer. Designed to provide satellite signals to multiple receivers as well as CATV/UHF/VHF signals. NO POWER SUPPLY NEEDED Designed to provide satellite signals from dish to multiple receivers. These switches allow for each receiver to be independently switched giving full channel reception to each receiver. See-Diplexers _ __ Today@SatelliteDish.com ___

3 in 8 out Multi-Switch w/Power supply. This switch has 3 inputs 2 from the dish (Deluxe LNB) and 1 from CATV/UHF/VHF Provides a diplexer. Designed to provide satellite signals to multiple receivers as well as CATV/UHF/VHF signals.

We Also have Active Splitters for providing power to the LNBs or Rack Mount In-Line Amps / Power Inserters. click here

• 2x8 Rack Mount Switch
• 3x8 Rack Mount Switch
• 4x8 Rack Mount Switch
• 5x8 Rack Mount switch
• 2x16 Rack Mount Switch
• 3x16 Rack Mount Switch
• 4x16 Rack Mount Switch
• 5x16 Rack Mount Switch

• LNB Power Supply
• Active Splitters
• In-Line Amps 
• DSRs 
• PHASE III & Flex Port

See Rack Mount it !

9 in 8 out cascading multiswitch with power supply

9x9x8 

 4 Dish inputs ( That's four dual LNB in ) plus a input for Cable or local antenna UHF/VHF . Has output for 8 Eight receivers. Cascading 9 outputs for another switch if necessary. Switching commands compatible 13V,18V,13V/22KHz18V/22KHz DiSEqC2.0

13 in 12 out cascading multiswitch with power supply

13x13x12 

Compatible with all Dishpro LNBFs and FTA satellite Systems. Perfect for 6 Dish in (that's Six dual LNB in) plus locale UHF/VHF or Cable CATV input with the output good for 12 receivers. It has 13 going over to another switch if necessary. Cascadable DiSEqC Switching commands compatible 13V,18V,13V/22KHz18V/22KHz DiSEqC2.0 

17 in 16 out cascading multiswitch with power supply

17x17x16 

Compatible with all Dishpro LNBFs and FTA satellite Systems. Perfect for 8 Dish in (that's Eight dual LNB in) plus locale UHF/VHF or Cable CATV input with the output good for 16 receivers. It has 17 going over to another switch if necessary. Cascadable DiSEqC Switching commands compatible 13V,18V,13V/22KHz18V/22KHz DiSEqC2.0 

Satellite USA WBS41202 Multi-Switch
$499.98

Satellite USA WBS41202NF 12 Way MultiSwitch for a 5 LNB DirecTV System 

Features:

• For use with DirecTV's new 5 LNB satellite dish only
• Will distribute up to 12 independent satellite receivers
• Outdoor mountable
• Multiswitch will also work on DirecTV's older style satellite dishes and satellite receivers
• Remote powerable via power port

Satellite USA WBT 410 DC Tap
$99.98

Tap off a system backbone and create multiple distribution options. DirecTV 5 LNB Tap

DiSEq & DiSEqC Switch - Multi-Dish Switches

DiSEqC 1.0 Switch

Spaun DiSEqC 1.0     2x1

Spaun DiSEqC 1.0 Switch 2 Satellite / LNB Reception.

Spaun DiSEqC 1.0 

• 2x1 (Two satellite, one receiver)
• 3x1 (Two satellite, one receiver, one UHF/CATV)
• 4x1 (Four satellite, one receiver)

DiSEqC 1.0 Switch

Pansat 4x1 DiSEqC 1.0 Switch
connect up to 4 satellite dishes (LNB's) to your FTA receiver.

DiSEqC 1.0 Switch

Economy  4x1 DiSEqC 1.0 Switch
connect up to 4 satellite dishes (LNB's) to your FTA receiver. DVB

Spaun DiSEqC 1.0 

• 5x1 (Two satellite, one receiver, one UHF/CATV)
• 5x4 (Two satellite, four receiver, one UHF/CATV)
• 5x6 (Two satellite, six receiver, one UHF/CATV)

All DiSEqC 1.0 Switches Call for latest pricing.

DiSEqC 1.0 Switch

Pansat 2x1 DiSEqC 1.0 Switch
connect up to 2 satellite dishes (LNB's) to your FTA DVB receiver.

DiSEqC 1.0 Switch

Economy 2x1 DiSEqC 1.0 Switch
connect up to 2 satellite dishes (LNB's) to your FTA receiver.

DiSEqC 1.1 Switch

Pansat 4x1 DiSEqC 1.1 Switch
connect up to 4 satellite dishes (LNB's) to your FTA receiver.

DiSEqC 1.1 Switch

Economy  4x1 DiSEqC 1.1 Switch
connect up to 4 satellite dishes (LNB's) to your FTA receiver. DVB

DiSEqC 2.0 Switch

Pansat 4x1 DiSEqC 2.0 Switch
connect up to 4 satellite dishes (LNB's) to your DVB FTA receiver.

DiSEqC 2.0 Switch

Economy  4x1 DiSEqC 2.0 Switch
connect up to 4 satellite dishes (LNB's) to your FTA receiver. 

Spaun DiSEqC 2.0    4x1

Spaun DiSEqC 2.0 Switch 2 Satellite / LNB Reception.

• DiSEqC2.0  2x1
• DiSEqC2.0  3x1
• DiSEqC2.0  5x1
• DiSEqC2.0  4x4
• DiSEqC2.0  5x4
• DiSEqC2.0  5x6
• DiSEqC2.0  5x8

All DiSEqC 2.0 Switches Call for latest pricing.

2x4 satellite 22Khz Switch

22KHz Tone-Controlled Auto Switch.

DirecTV, DVB, 4DTV Compatible

Switches between two separate LNB feeds on the same or separate dishes

Used in signal routing in DSS, Ku, C, digital and analog environments

5x4 satellite 22Khz Switch

DirecTV, DVB, 4DTV Compatible

22KHz Tone-Controlled Auto Switch.

• All Spawn product is 22Khz compatible.
• 5x8 22Khz Switch
• DirecTV 22Khz Switch
• Rack mount 22Khz
• 2x1 and More...

• DirecTV uses 22Khz switch
• Dish Network uses 21Khz Switch
• DiSEqC 1.0, 1.1, 1.2, 2.0 Control

2x1  22Khz Switch

22Khz Switch Aspen

See power Inserters & Active Splitter 

Also see LNB "IF" Amplifiers In-line Amps

See-2nd Dish Kits

SW21 Multi-Dish Switch
$27.99

Dishpro DP21      $34.99

Multiswitch 21 KHz for Dish Network receivers and two dish antennas, any model. Provides satellite signals from multiple Dishes. complete your installation using a second dish antenna. _ __ Today@SatelliteDish.com ___

Multi-Dish Switch for 3 or more receivers w/Power supply
$189.99

3 in 4-8 out Multi-Switch w/Power supply. This switch has 3 inputs 2 from the dish (Deluxe LNB) and 1 from CATV/UHF/VHF Provides a diplexer. Designed to provide satellite signals to multiple receivers as well as CATV/UHF/VHF signals. (Must use two SW21 switches). _ __ Today@SatelliteDish.com ___

SW21 CLONE 

21 KHz switch for Dish Network receivers and two LNBF's, any model. Provides satellite signals from multiple Dishes. complete your installation using a second LNBF/dish antenna.

Flex34 

Four inputs for use with up to four orbital locations.•  Four outputs for connection to up to four independent inputs.• Passive "trunk" connections, to cascade to another flex34 Switch.•  Does not require power insertion. • Can be used indoors or outdoors.•  Off-Air input is HDTV & Flex compatible.

Dishpro DP34 switch

Dish Network DP34 switch. Please call on lastest Flex LNBF's and / or Flex Port Dish Network Switches.

DP44 Switch