IF / L-Band Fiber - Satellite IF Optical Transport - TRANSMITTER

 

 

 

L-Band Fiber
Optic Transmitter

Part # S3A-3000 

Blonder Tongue Affordable Alternative to Coaxial LNB Cabling • Compact and Environmentally Protected Housing • 850-3000 MHz Bandwidth For Enhanced Frequency Stacking Applications • 18 dB Optical Loss Budget

 Fiber Optical IF  L-Band Transmitters

 

 

 

 

FIBER TRANSMITTER, L-BAND SM SC/APC 12DB

Part # VB150S-T-RA3

$1995.00

Fiber Optic singlemode L band transmitter, Radiant Fiber Communications, VB150S - series, 12 db @1310nm SC/APC card cage version

TX, L-BAND STANDALONE, 500MHz-3GHz

 

Part # OLRT-D3013-F3-F

$699.00

 

TX L-BAND STANDALONE 10MHz-4.0GHz

 

Part # OLBT-X4013-D5-S

$749.00

 

RX, L-BAND MINIATURE STANDALONE

 

Part # OLMR-X2200-HG-S

$299.98
 

Rugged 3.0GHz L-Band Optical Transport

Part # OLRT

$950.00

OLRT Rugged 3.0GHz L-Band Optical Transport Link transmits 500MHz to 3,000MHz RF signals. The link offers high or low gain, and can be specified for 1310nm, 1550nm, or CWDM wavelengths. The transmitters offer remote LNB powering, and the link is configured in a rugged standalone enclosure.

 

TX, "LL" Indoor 48-1000MHz, 13dBm

 

Part # OTOT-1000-13

$4100.00

Olsen Technology "LL" Indoor TX, 48-1000MHz, 13dBm/20mW DFB, 90-240VAC, SC/APC

 

 

 

 

 

   

TX LL INDOOR 48-870MHz

 

Part # OTOT-870-3

$1995.00

 

TX "LL" Indoor 48-870MHz, 6dBm/4mW DFB

Part # OTOT-870-6

$2100.00

Olsen Technology "LL" Indoor TX, 48-870MHz, 6dBm/4mW DFB, 90-240 VAC, SC/APC

 

 

  

 

LBAND OPTICAL CARD CHASSE  holds 6 cards

 

Part # CR200RPS/VB50

$1749.95

Card Cage, Radiant Fiber Communications, holds up to 6 L band cards with internal & redundant power supplies

 

 

   

 

L-Band Optical Transmission Equipment

Part # DEV7000

Chassis carrying up to 16 modules Optical transmitter module with RF bias feeding Optical receiver module with RF sensing Monitoring output of incoming/outgoing RF signal Monitoring of laser in transmitter and receiver module Space requirement only 3 HU Redundancy switching for transmission lines 1+1 and n+1

 

 

Dual Channel Active Bias Tee L-Band for professional applications

Part # DEV 8125/OPT

Dual channel active bias tee Frequency range 950-2150 MHz Dual redundant power supplies with status output LNB bias current monitoring RF outputs or optical outputs RF sensing with adjustable threshold Space requirement only 1 HU

 

L-Band Distribution Amplifiers
1:8, 2x 1:8, 1:16 with optical inputs

Part # DEV2182-CALL

50 and 75 Ohm versions available Optical receiver with RF sensing Monitoring output of outgoing RF signal Laser light low detection

 

 

 

Tekron RSS-2L

RSS-2L L-Band/LNB Feed Automatic Redundancy Switch

Part # RSS2L

 

 

Quintech SRR-SERIES

SRR-Series RF Routing Switches

Part # SRR-Series

 

 

 

 

Quintech RFS-2150

 

RFS-2150 L-band (950-2150 MHz) Sensing Redundancy Switch

Part # RFS-2150

 

See: Passives & Dividers

 

 

 

Quintech LS2150P

 

LS4150P L-band (950-2150 MHz) Passive Splitters

Part # LS2150P

LS4150A L-band (950-2150 MHz) Active Splitters

Part # LS2150A

 

 

 

 

 Emcore 3005

 

L Band Satellite Fiber Optic Transport Link

Part # EM3005

 

 

 

 

Emcore 3000

 

Emcore 3000 Series Satellite L-Band teleport transport system

Part # EM3000

Teleport environment. Spanning the entire L-Band frequency range (950-2150 MHz), the link employs a number of feature rich components to create a highly reliable system. Available in stand-alone or 3RU rack-mount configurations, the units may be specified for conventional 1310 nm or 1550 nm operation, CWDM operation or DWDM operation. CWDM or DWDM optics greatly expand the potential capacity of installed optical fibers by allowing up to 16 separate transmitters to be accommodated on one single-mode fiber.

 

 

  

Emcore 2990PRO

 

L-Band Satellite Fiber Optic Transport

Part #EM2990PRO

Emcore 2990Pro L-Band Satellite Fiber Optic Transport The Emcore Model 2990PRO L-Band Satellite Transport System provides an economical solution for transporting digital signals for numerous satellite distribution applications, including headend relocation, and distribution of digital broadcast systems (DBS). The Emcore 2990PRO utilizes a cost-effective coax cabling configuration to distribute the RF signals from the dish to the transmitter and from the receiver to the headend.

 

 

 

Multiple L-Band Distribution Amplifiers (DAs) and/or Distribution Matrix switches integrated in a 4 HU Chassis

Part # DEV2180OPT

Up to 12 amplifiers with optical input Up to 12x 1:8 or 8x 1:16 distribution amplifiers in a 4 HU chassis Up to 3 matrix switches 4:11 or one 4:60 Reduced space requirement for lower budget 50 W, 75 W and mixed versions Dual redundant power supplies field replaceable in service Field serviceability without de-installation Monitoring output @ 0 dB at the front panel for each input

 

Olson OLRT/OLRR

 

Rugged L-Band Link

Part # OLRT/OLRR

The Olson Model OLRT/OLRR Rugged L-Band Link offers a high performance, versatile transport link in a very compact and rugged package. The Rugged L-Band Link has been engineered to meet today’s high performance standards for L-Band transport with an extreme bandwidth range that will also allow the system to handle the next generation of satellite signals. The Olson OLRT/OLRR is ideal for a wide variety of communicationsapplications, including LBand satellite antenna remoting, trunking radio,telemetry tracking, and time and frequency reference distribution. The standard frequency range is 500MHz to 3,000MHz. The extended frequency range option of10MHz to 3.6GHz allows this system to accommodate additional transponders coinciding with common European satellite communication applications

 

 

 

 

Blonder Tongue Multi-Output L-Band Fiber Optic Node, 24 Outputs Transmitter

Part # FILN-S3A-2050-24

$899.00

 

Blonder Tongue Multi-Output L-Band Fiber Optic Node, 8 Outputs

Part # FILN-S3A-2050-8

$799.00

Fiber Optic L-band Transmitters

 

 

 

 

 

 

Blonder Tongue

Multi-Output L-Band Fiber Optic Transmitter, 16 Outputs

Part # FILT-S3A-2050-16

$2795.00

L-Band Fiber Optic Transmitter The FILT-S3A-2050-8/12/16 series of fiber optic transmitters allow the operator to distribute DTH/DBS signals from a single satellite dish to multiple locations via single mode fiber. The transmitter is available in 8, 12, and 16 output versions to accommodate a variety of MDU topologies. The unit features automatic gain control (AGC) on the satellite input to help ensure optimum input levelswith changes in weather. The transmitter is equipped with two LED indicators, one for power on (green) and the other for a low RF input alarm (red). For remote monitoring.

 

 

Blonder Tongue L-Band

Multi-Output L-Band Fiber Optic Transmitter, 8 Outputs

Part # FILT-S3A-2050-8

$1495.00

 

Multi-Output L-Band Fiber Optic Transmitter, 12 Outputs

Part # FILT-S3A-2050-12

$2395.00

 

   

 

See: IF / L-Band Receivers

See: AC / DC

See: Splitters and Dividers

See Multi-Switches

  

 

http://www.SatelliteDish.com

Call Today (954) 941-8883

 

Fiber Optical IF  L-Band TransmittersFIBER TRANSMITTER, L-BAND SM SC APC Satellite FiberL-Band Optical Transport

2002 Copyright © SatelliteDish.com All rights reserved.